Overclock.net - An Overclocking Community - View Single Post - [Build Log] 900D Milk machine
View Single Post
post #1 of (permalink) Old 06-02-2013, 08:04 AM - Thread Starter
New to Overclock.net
Svartie's Avatar
Join Date: May 2013
Location: Sweden
Posts: 34
Rep: 0
Hi there, as many can see not been registered on overclock forums for long. This is my first build log on the site.

Reason behind why 900D case choice. I’ve been on case hunt since it bought my cm stalker case in 2004 that stayed with me for 3 major hardware upgrades. Looked at Li-lian cases D8000 or PC70, cases from Caselabs and ofc the 800D, all possible fulltower cases but none of them felt quite right. All had some weird gimmick that made them undesirable. Then at start of 2013 i read some rumors about a massive case from Corsair and at CES and i saw the press photos of the 900D + the intervju Linus tech made with George. I was HOOKED. I just had to get one biggrin.gif
enough with backstory for this build. The specs,


Core Components:

CPU: 3930k
Mobo: Rampage IV Extreme
Ram: 8 gb Dominator Platinum with Light Bar Upgrade Kit
GPU: 3 x GTX 680
PSU: AX1200i
SSD: 2x Samsung 840Pro 256Gb (in raid1)

EK items:

EK Supremacy CPU block Nickel CSQ
EK-FB KIT RE4 - Nickel CSQ
3x EK-FC680 GTX+ - Nickel
EK Triple Parallel SLI bridge CSQ
2x EK-D5 X-TOP CSQ - Acetal
2x EK-RES X3 250


Pumps: 2x acool VPP655 - Laing D5
Radiator upper: EK 480 XTX
Radiator lower left: EK 480 XT
Radiator lower right: EK 240 XT
Fans: 10x Air series SP120 Quiet edition
4m - EK-Tube ZMT Matte Black 16/10mm
Bitspower Crystal Link - 2slots, 3slots, 4slots
Coolant: 3x Pastel Pre-Mix Ice White 1Ltr
15M 12/10mm Ultra Clear Hard Tubing


Bitspower, EK and some no brand extensions. will make more detail list when i get the case and start building

Pump cables and other smaller cable lengths made by myself with some random brand ( Mod/ Smart ) beginner kit. Rest is Corsair Professional Sleeved Cable White (Generation 2)

Complete Image, more at the end.

And some more images.


Building test rig to see if all components are working.

Noctua NH-D14 stopped me from running 3 graphics so had to get myself a H100i


Pre building loops to see what fittings missing and I wont run the inlet fitting at the top of the x250. Both x250 will have same looks. Only change that im planing is to change the black to white. to match the coolent better.


Testing the fan and Corsair Link


Dominator Platinum lightning.



Finished photos.


more pre build items.

Will eventually get some good pictures to post up. Soon as I get the case.
Hope you guys stay tuned when the assembly begins.
Svartie is offline