OK, thank you! I will be able to get back to this on Monday only.
No problem. I appreciate you taking time for it. I am going to be on a business trip this week, so if there is anything else you would like me to test I will be able to do that after I return home on Friday evening.
Here is version 188.8.131.52 which should work fine with Intel Core i7-7800X, i7-7820X and i9-7900X processors. To speed up SPD reading go to the "SMBus" main menu and select "Enable Fast Read and Write". I hope this function should work fine either.
I have a memory problem for the first time in a long time - POST problem on the XMP or manual 3200MHz 14-14-14-34-48 1,35V BIOS F41
Thaiphoon Burner report error "CRC ERR" it may be related? or should I look for another solution?
Hello! I would suggest you to reset memory related BIOS settings (frequency and timings) to Auto to check whether CRC error is a reason for your problem. After resetting, don't forget to turn off your PC.
SPD byte 0 needs to be restored, but I suspect its cleared status doesn't affect to what you are talking about. It describes the total number of bytes in the EEPROM chip (it is 512) and the number of bytes used.
Hi Voodoo, can you please advise what is this error when I compare my RAM with SPD file from your database? As CRC is OK on all 4 sticks, but 2 out 4 sticks do not have exact same SPD as SPD file from your database. I do not see any problem with memory, CPU-Z can read XPM profiles properly. Thanks