Overclock.net - An Overclocking Community - View Single Post - [Build Log] i7-4770k - GTX 780 Ti SLI - Corsair 750D - Custom Liquid Cooling
View Single Post
post #7 of (permalink) Old 11-11-2013, 01:26 AM
New to Overclock.net
Jakewat's Avatar
Join Date: Apr 2013
Location: New Zealand, Auckland
Posts: 450
Rep: 9 (Unique: 9)
Well my plan is almost the same as yours except for the difference in rad placement and an extra GPU block in yours. I'm going to have a swiftech MCP665 D5 pump at the bottom of everything, have the photon turned upside down so the three holes are at the top and the fill port now links directly to the pump with tubing. For you the pump must flow first to the 280mm rad at the front then to the blocks etc etc... since the water must come down onto the pump rather than try to pump the water up the res, which most likely will stress or run risk of running the pump dry.
This will allow you to use the extra holes on the res as fillports.
Jakewat is offline