Overclock.net - An Overclocking Community - View Single Post - GPU brackets for mounting Antec 620/920 and Corsair h50/70/110

View Single Post
post #26 of (permalink) Old 03-26-2014, 09:13 AM - Thread Starter
New to Overclock.net
Shazberries's Avatar
Join Date: Mar 2014
Location: Phoenix, Arizona
Posts: 45
Rep: 0
Originally Posted by richie_2010 View Post

pc ill is meaning the holes on the pcb are set for 4mm diameter or slightly bigger.
keep your holes as 3mm but use thinner screws because if you paint em it will make the internal diam smaller.

you have the correct dimensions in the pic you liked buddy for the pcb spacings.

How will I be able to fit a screw through a 3mm hole and then screw it into a 4mm hole? I will be washers or a backplate I assume?
Shazberries is offline