Originally Posted by BruceB
If you want to get the psu to the bottom without Messing around too mcuh then you can flip the MB tray upside down (it's quite a common mod, here's a good example of what I mean: Flipped MB
That is just awesome. Thank you! I'm going to seriously consider that.
EDIT: I did some quick test fitting, and I am *totally* doing this. It looks like all I need to do is:
- flip back panel upside down with mobo tray and mobo support bar attached
-drill new holes to mount top and bottom of back panel
-drill new holes to mount mobo bar to front panel near bottom
-flip lower drive cage 180 degrees so it faces the other side and re drill holes there.
May have to drill new holes for side panels. Not sure yet.
Thank you very much for the tip. I should have new photos up today.