Originally Posted by doritos93
Anyone have any good experience with the Auto functions?
I tried overclocking and it tested some obscene settings straight off the bat and crashed everything. Not bright
The undervolting function I haven't tested too much, but my card is a dud anyway. Can't hit boost clocks, not even close, and dropping the voltage even 50 mv causes instability
The auto function crashed mind too. I wouldn't bother using it.
I personally have only overclocked my memory. Increased from 945mhz to 1050mhz. Just didn't seem worth doing the core when the temps/voltages mean there isn't much headroom.
By the way, I had a lot of issues with stability and managed to rectify them. The issue was I was feeding both 8 pin electric plugs from one PSU cable, apparently that's a really bad idea and many people have had problems. If you haven't already, move to two PSU cables, one for each 8 pin.
Also, I don't know about the Strix, but reference has a switch on the PCB to change max board voltage from 200w to 220w. Check if this is correct. Mine was in power save by default.