Overclock.net - An Overclocking Community - View Single Post - Software for R9 285 bios edit

View Single Post
post #820 of (permalink) Old 10-22-2016, 01:27 PM
mynm
New to Overclock.net
 
mynm's Avatar
 
Join Date: Jan 2016
Posts: 623
Rep: 54 (Unique: 20)
Thanks @m42BMW thumb.gif

I have tested LLS 0 + offser 1 (-25mv) so I have changed these values like this:

01 07 0C 00 0E 00 00 00 00 00 00 00 <--01 VDDC + 07 SVID2 voltage + usSize + usLoadLine_PSI

to 01 07 0C 00 01 00 00 00 00 00 00 00

05 07 0C 00 0E 00 00 00 00 00 00 00 <--05 VDDGXF + 07 SVID2 voltage + usSize + usLoadLine_PSI

to 05 07 0C 00 01 00 00 00 00 00 00 00

So the values are changed to:

offset trim 01= 1 offset -25mv
load line slope trim 000= 0 remove all load line drop form output.

Now I get a -25mv offset, but the VID is disabled and voltage seems to be less variable than stock, but I'm worried to see more pronounced min and max voltage peaks:
Warning: Spoiler! (Click to show)



Perhaps is better to leave LLS to 3 or other LLSs, with stok LLS max voltage peak seems to be below the VID like is said in this link provided by gupsterg http://www.masterslair.com/vdroop-and-load-line-calibration-is-vdroop-really-bad .

I will test LLS 12.9%.
mynm is offline