ok, so when I first did the lighting for this rig, I used the contact Velcro. I stuck one piece at each end of the light, and the other side I stuck to the case. this worked for about 3 months before the lights came loose the first time, and now 4 years later, it lasts about 5 min, before the light comes loose from the Velcro.
any suggestions on what to use to secure the lighting to the case?
I have a total 2 X 12", and 2 X 18", light strips on the build now, and I would like to be able to remove and replace the lights as they go out.