Originally Posted by Ensate
Tested all bios versions since release. Im currently on 0082. They all seem to fail miserably at fan control. No matter if I use AIsuite fanXpert or just he bios alone. Every so often the fans ramp to full speed on two out of the three channels (never the same 2), and wont slow down again until a reboot.
Im using water cooling with the fans set to use a temperature probe on the temperature in port. This setup ironically worked perfectly with the same cooling hardware on my previous Asus z97-a motherboard with AIsuite,
Is sorting the cooling controller on the roadmap that anyone knows of?
Can you give me exact details for reproducing? Which fan headers? Which AISuite version? Does it happen if you uninstall AISuite?
Originally Posted by malitze
Do you have a take on the BCLK fluctuations @elmor
? When I get 107.3 instead of 104.8 that means ~4 GHz instead of ~3.9 and that's like a guaranteed code 8
There is no such fluctuation, it's 100% a readout problem. Reference clock is not directly measured, but calculated using a suitable counter and prone to errors. The only platform which has hardware counters for reference clock is Skylake/Kaby Lake. Do you have any details on accuracy @Mumak
Originally Posted by lordzed83
@elmor i got interesting thing with my ch6. Any volts i set are higher than what i set. Like ddr i git at 1.375 and its running 1.40x. Pll i reduced to 1.79 and with that it runs around 1.809. Do some of em got it that way or woot?? 2 psu's same thing.
Other thing dunno if ya seen my post but on 079 memory timings got like stuck. Could not lower or rise any. 3x cmos clear and loaded standard ones still ware stuck. Only option to fix it was glashing other bios. Bizzare.
Besides that iw spend 20 hours playing around with 079 and 081 and sticking with 081. Runs great.
One more question. Does this mb got option to turn off HPET??? Or we just turn it off and on in windows. I assune off is better for bios oc??
Thanks. Looking forward for final version of 081
Readouts are not perfect, and you won't ever get the exact same voltage as what's applied. HPET is selected based on the OS preference.