Overclock.net - An Overclocking Community - View Single Post - ROG Crosshair VI overclocking thread

View Single Post
post #21445 of (permalink) Old 06-29-2017, 06:19 AM
ItsMB
New to Overclock.net
 
ItsMB's Avatar
 
Join Date: Jun 2017
Posts: 82
Rep: 4 (Unique: 2)
Quote:
Originally Posted by kaseki View Post

I think this message can prove helpful to new overclockers here. However, I need to point out a couple of related things. When The Stilt referred to the real-time-termination loadings as {disabled, disabled, RZQ/5} I don't think he meant that the first two parameters were zero ohms. More likely 'disabled' sets them at infinity ohms.

To high a terminating resistance does not increase circuit "stress." It may degrade signal to reflected signal ratio, just as too low a terminating resistance may also degrade signal to reflected signal ratio. This is also true of procODT.

What specifically did you find in the B-die specs about RTT values? I looked and failed to find anything, perhaps from data saturation ennui.

Thanks

This is a message in general, xd. I know that Proct is a termination resistance an does not have any effect on the current, but im showing my results llooking at voltages and temperatures cause i dont know the values that and specific procdt value can influde after a train, i know is just for noise etc.. like on any comunication bus, industrial, or any ethernet etc... More or less that i try to say is that i dont have enough information about all this stuff.

The Rtt values maybe are that infinite i dont know what he mean, maybe a disabled is infinite. I mean that 48 is more close to 0 than 240, its only a conclusion that can be wrong, xD

The B-die document about im talking is the Spec samsung support file on samsung site about our chips, but they only talk about speed to 2666 max, so 3200 is not specified in any caculation. I might be provided by Gskill to amd, and from amd to asus i guess, this is why im talking about the responsability of the vendors of suplly the proper specs. Excuse my confusing words im not a perfect english speaker, and imagine the expressions, xDDDD
ItsMB is offline