Overclock.net - An Overclocking Community - View Single Post - How To: Unbrick Your Bricked Graphics Card/Fix a Failed BIOS Flash

View Single Post
post #250 of (permalink) Old 07-28-2017, 10:09 AM
New to Overclock.net
ploy's Avatar
Join Date: Jun 2017
Posts: 6
Rep: 0
Originally Posted by Screemi View Post


i already posted in the polaris bios mod thread but found this one while googling. maybe it's the better place to discuss my problem

no i found the following quote in the comments of the 8-1 pin method:
that seems to be the case for my card. does anybody have an idea how to fix it apart of the pin shortening?

if not i have to go the pin route. does anybody have an idea where the bioschip of the strix 480 is located? after some googling i found a picture of the back of the pcb but the resolution is not that high. i marked the ic i suspect to be the bios.


I tried atiflash 4.17 from 2013 but i get a "adapter not found". any other dos versions i can try?

€dit: i used every force string available with atiflash and what can i tell you: The freaking Card is up and running again!!!! should have tried that earlier. already got my solder iron ready biggrin.gif

Was that the correct chip? Which is pin 1 and pin 8?
ploy is offline