Hi, I don't have a fury but I have tested to change the ASIC Profiling Voltage in my 380 like you can see here:https://www.overclock.net/forum/67-am...l#post26478187
And I see that the fury have the same ASIC Profiling Voltage Info table as the 380 but duplicated. It should be more or less like this in the fury:
The problem is that there are two tables so I see two max voltages, the red highlighted values ones, and two min voltages, the blue highlighted values ones. So I don't know if you have to change the first one, the second one or both.
The max voltage at the image is 8813 --> 1388 -->/4= 4E2 --> 1.250v , so to chage it for example to 1.21875v is like 121875x4= 487500 --> 4875-->to HEX= 130B
The min voltage is 100E --> E10-->/4= 900mv
The grey highlighted values acording to my test with the 380 are doing this:
The first one is lowering in littel increases the voltages from DPM 1 to 6 in big increase is lowering DPM 1 to 7 voltages. And increasing the voltage if is lowered.
The second ones are lowering DPM 1 to 7 voltages if are lowerd and incrasing them if are increased.
I think that is better to don't to test to change this values if your gpu don't have a dual bios. And as far as I know no body have tesded to change that values on a fury.