Overclock.net - An Overclocking Community - View Single Post - ROG Crosshair VI overclocking thread

View Single Post
post #33752 of (permalink) Old 02-13-2018, 08:46 AM
Ramad
New to Overclock.net
 
Ramad's Avatar
 
Join Date: May 2017
Posts: 878
Rep: 111 (Unique: 61)
Here are my settings for the latest BIOS 6001. This could be helpful if you have dual rank Samsung E-die based memory. The BIOS is good and is better, in my opinion than 0020/3008 or 3501/3502. Lower Processor ODT helps a lot with stability, so keep that in mind if you face RAM stability issue.

Current settings BIOS 6001
  • OS: Windows 10
  • R5 1600 @3.8GHz, Custom P-states, Relaxed EDC throttling: enabled
  • Patriot Viper Elite @3200MT/s (dual rank 2 x 8GB) with primary latencies of 14-17-17-17-24
  • CPU voltage: 1.3V - 0.01250V (offset)
  • SOC voltage: -0.00625V (offset) BIOS reads the voltage as 1.087V
  • DRAM voltage: 1.4V
  • VTTDDR: 1.4V/2 = 0.6996V
  • DRAM CTRL REF Voltage on CHA and CHB: 0.58x
  • CLDO_VDDP: 1000mV
  • CAD drivers setup: 0 - 0 - 0
  • CAD drivers strength: 20 Ohm- 20 Ohm- 20 Ohm- 20 Ohm
  • tRFC at RAM defaults: 416 - 256 - 176
  • PROC_ODT: 53.3 Ohm
  • Rtt values: RZQ/3 - RZQ/3 - RZQ/1
  • DRAM R1-R4 values: 0
  • PCIE R1-R3 values: Disabled - Disabled - 0
  • VDDP: 1.2V


All relevant settings
Spoiler!


P-states settings
Spoiler!


Result
Spoiler!
Attached Thumbnails
Click image for larger version

Name:	6001_2.PNG
Views:	1850
Size:	268.7 KB
ID:	84521  

Click image for larger version

Name:	6001_4.PNG
Views:	1777
Size:	275.3 KB
ID:	84529  

Click image for larger version

Name:	6001_5.png
Views:	1871
Size:	170.9 KB
ID:	84537  

Click image for larger version

Name:	6001_6.png
Views:	1761
Size:	210.8 KB
ID:	84545  

Click image for larger version

Name:	6001_7.png
Views:	1736
Size:	170.7 KB
ID:	84553  


Last edited by Ramad; 02-13-2018 at 09:37 AM.
Ramad is offline