Overclock.net - An Overclocking Community - View Single Post - Hotrod an Aurora R7?
View Single Post
post #7 of (permalink) Old 03-03-2018, 01:53 AM - Thread Starter
hdtvnut
New to Overclock.net
 
hdtvnut's Avatar
 
Join Date: Nov 2017
Location: Cocoa, FL
Posts: 131
Rep: 0
Yes, the bios has limited settings for use with K chips; see the service manual. No LLC and a fixed xmp1 of 2933. Alienware Command Center has pages for fans/monitors, win 10 modes, and O/C, with two preset O/C profiles of X46 non-xmp and X48 xmp1, or custom profiles to X50. Also has a stress test. Lacks some settings and limited ranges for others, probably to minimize potential damage. Big Brother Is Watching You.

XTU works in place of ACC's O/C page, but profiles with avx different from 3 and X settings above 50 don't survive reboot; the X51 setting I am using still looks right, but is not in effect, and requires resetting.

Last edited by hdtvnut; 03-03-2018 at 01:56 AM.
hdtvnut is offline