Overclock.net - An Overclocking Community - View Single Post - [Build Log] Corsair 1000D (Case swap + dual system) i7 6800K, 1080FTW i9 9900K 2080ti

View Single Post
post #1 of (permalink) Old 05-25-2018, 08:45 AM - Thread Starter
Pilz
New to Overclock.net
 
Pilz's Avatar
 
Join Date: Jan 2017
Location: Texas
Posts: 76
Rep: 1 (Unique: 1)
I decided it was time for another super tower build since Corsair launched their massive Obsidian 1000D case. My previous build took place in an equally large Thermaltake The Tower 900 which has been great.

For those of you who didn't catch my last build, I'll link it here: https://www.overclock.net/forum/show....php?t=1619878

This time around I'm planning to implement a dual system with a minimum of 3 full loops. I won't finish the complete project until Intel next gen of HEDT CPUs comes out, so, for now, I'll be keeping my current internal hardware with no secondary system.

The plan is to run my i7 6800K and EVGA 1080FTW on a mini ITX board as the secondary system. My primary will likely consist of Intel's next-gen X399 (not to be confused with AMD) and a GTX Titan T (whatever it will be called assuming one launches this year).

For now here's a rundown of what's going to get done and the parts being used:

Tower:
-Corsair Obsidian 1000D Super tower

CPU/GPU/RAM
-Corsair AX760 PSU
-Asus ROG Strix X99 motherboard
-Corsair Dominator Platinum DDR4 3000mhz 8GB RAM x4 OC to 3100mhz
-i7 6800K OC to 4.35GHz
-EVGA 1080 FTW

Cooling:
-Alphacool Nexxos 480mm UT 60 radiator x2
-Corsair ML120 fan x18
-Corsair ML140 fan x3
-EKWB D5 PWM pump x2
-EKWB 1080 FTW Nickel backplate
-EKWB 1080 FTW Nickel/Plexi water block
-EKWB Asus nickel monoblock

Fittings/Tubing:
-XSPC G1/4 Chrome Rotary
-XSPC G1/4 Chrome 90 rotary;
-XSPC G1/4 Chrome Ball valve
-XSPC G1/4 Chrome T fitting
-EKWB 16mm HDC Nickel Fittings
-Mayhems Pastel Green coolant
-Mayhems Pastel White coolant
-Alphacool Eisbecher D5 250mm x2
-Bitspower 16mm PTEG
-Primochill 3/8-1/2 soft tubing (for the back plumbing)
-EKWB G1/4 Chrome plug x2
-EKWB Pass-through fittings nickel x4
-EKWB 90 deg fittings in nickel
-10,000mm of Thermaltake V Tubular 16mm PTEG (You can never have too much tubing)

Cables/Misc
-Corsair Green PSU individually sleeved cables
-Cable Mod custom extensions
-Samsung 840 EVO 250GB SSD
-Samsung 960 EVO 500GB M.2 SSD (boot drive)
-Samsung 850 EVO 500GB SSD
-Cable Mod 60cm UV + RGB Led strip x2
-Cable Mod custom PCIE x8, ATX, EPS, SATA power and Molex cables
-Cable Mod Aluminum screws in green
-Cable Mod SATA cable in green
-Aquacomputer Aquero
-Aquacomputer Splitty 9 x2


As for the peripherals here's what my 'office' has:
-Uplift Desk with Bamboo top (72"*30")
-Uplift Desk side take with Bamboo top (48"*30")
-Corsair K95 Platinum Cherry MX Brown
-Razor Orbweaver Chroma stealth
-Logitech G503
-Corsair M600 dual sided mouse pad
-Amazon dual monitor mount
-Ben Q mouse bungee

Future additions
-AS Rock X99 mini ITX motherboard
-Intel i9 9900K CPU
-Asus ROG Z390 Designaire motherboard
-Acer Predator 21:9 200hz HRD10 monitor
-32GB DDR5 Ram (assuming it's out)
-Samsung 970 Pro 1TB
-EKWB full nickel/plexi block for the CPU and GPU
-Nvidia 2080ti
-Corsair AX1600 PSU

Pictures of the build will be added as I get the new parts in next week!

TT 900, Aquacomputer pumps + controller, R9 3900X, Gigabyte Aorus PCIE 4 NVMe, RTX 2080Ti, EKWB, dual 480mm rads

Last edited by Pilz; 09-04-2018 at 03:13 PM.
Pilz is offline