Overclock.net - An Overclocking Community - View Single Post - * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *

View Single Post
post #3867 of (permalink) Old 08-22-2018, 08:41 PM
TLCH723
New to Overclock.net
 
TLCH723's Avatar
 
Join Date: Nov 2010
Location: NYC, NY
Posts: 826
Rep: 31 (Unique: 28)
I said "You can EASILY fix a bent blade but not a cracked blade." Bent blade - just bent it straight again. Cracked blade - need to reforged. Which one is easier?

You know not everyone has time to keep taking the heatsink off, clean it, reapply paste and attached the heatsink back on. Lets alone take photos of the pins.

Another update:
I have children coming over tomorrow so I put everything back into the case and run memtest. And it failed. Now need to wait until the children are cleared before anymore testing. And no, I did not forget the standoff since the case come with preinstall and cannot be removed


Back to my original question, BESIDE BENT PINS, what other places should I check on the motherboard? None of the caps seems to be leaking or exploded. What other things I should do?


Canon T3i/600D | EF-S 18-55mm f/3.5-5.6 IS II Lens | EF-S 55-250mm f/4-5.6 IS II Lens | Tokina AT-X 116 PRO DX-II 11-16mm f/2.8 Lens | Sigma 50mm f/1.4 DG HSM Lens ART
YongNuo YN568EX | 2 x YN622C

Nikon FG | 50mm f/1.8 Series E



Last edited by TLCH723; 08-22-2018 at 08:48 PM.
TLCH723 is offline