Overclock.net - An Overclocking Community - View Single Post - Titan X (Pascal) Shunt Mod Done With Resistors

View Single Post
post #19 of (permalink) Old 09-12-2018, 03:26 PM - Thread Starter
Asmodian
Robotic Chemist
 
Asmodian's Avatar
 
Join Date: Aug 2009
Location: San Jose, California
Posts: 2,586
Rep: 191 (Unique: 128)
Quote: Originally Posted by ThrashZone View Post
Okay yeah it was confusing see the image from this
https://www.mouser.com/ProductDetail...OAOWVexWG0k%3d

And nothing on the card show shows it lol
Yes, that was confusing to me too. The image is from one of the tiny versions of this resistor from the same line, the giant ones I ordered look exactly like the ones on the card, as you can see in my photos. I did order from that link with the wrong image. I almost ordered other ones that had a more similar image but I am glad I didn't.

They do say "Images are for reference only See Product Specifications" and they mean don't use the image for reference beyond what type of component this is.

Quote: Originally Posted by Gilles3000 View Post
If you do end up wanting more current, but don't want to wait on different resistors. You can stack 2 to get effectively a 2.5mΩ resistor.
I actually bought 2mΩ resistors as well, which is about as low as you can go without triggering a low power safety check, but decided to keep it at a limit of double the power in case someone did run something like furmark on it.
Asmodian is online now