Originally Posted by Asmodian
I finally got a chance to test some other shunts on my FE 2080 Ti.
When using 5 mOhm resistors, as I did on my Titan X (Pascal), the 2080 Ti goes into emergency mode with a lot of loads (stuck at 300 MHz). My first try adding a shunt above 5 mOhms, 8 mOhms, did not trigger the cards safety mode.
This is not bad, 1/5 + 1/8 = 1/3.077, for a final power limit of 1.625 * 260 = 422.5 watts (520W at 123%).
Sadly my card doesn't OC that well, 2070 MHz core and 2000 MHz memory, but no throttling is nice.
Time Spy Graphics Score: 16017
Nice work! My card is a PALIT 2080Ti DUAL with a Non-A GPU with 112% bios. What will a shunt mod give me in Powerlimit? And did you do it on a Referens design PCB?
Would a resistor like this be usable? I have alot over from my old days fiddeling with 780Ti Volt modding.
Last edited by TobbbeSWE; 12-03-2018 at 06:29 AM.