Overclock.net - An Overclocking Community - View Single Post - EPDM O-Ring for KP Venom POT/DICE Working.
View Single Post
post #1 of (permalink) Old 01-03-2019, 02:14 AM - Thread Starter
New to Overclock.net
richiec77's Avatar
Join Date: Sep 2014
Posts: 129
Rep: 7 (Unique: 7)
EPDM O-Ring for KP Venom POT/DICE Working.

Tested to ensure the material doesn't degrade and seals. Put 1 O-Ring in acetone for 48 Hours straight. No degradation. Also tested by using it on my Venom POT, filled with Acetone and chilled with DICE. Spend 2 hours at ambient temps with no leaks. Spend 1 hour at -78C with no leaks. Any spills on the container in the pictures is from me making a Volcano dumping DICE too fast.


This is the link to the O-rings I bought. It's a 20x pack so there's a ton left over.


I'm mailing 3 to Kryton to test on his pot as well.

If anyone has both a Venom and T-Rex, can you verify if it's the same dimensions for the Base/Top?
richiec77 is offline