Overclock.net - An Overclocking Community - View Single Post - 2080 Ti - Working Shunt Mod

View Single Post
post #25 of (permalink) Old 01-12-2019, 11:42 PM - Thread Starter
Asmodian
Robotic Chemist
 
Asmodian's Avatar
 
Join Date: Aug 2009
Location: San Jose, California
Posts: 2,383
Rep: 177 (Unique: 117)
Quote: Originally Posted by Kalm_Traveler View Post
I have no 2080Ti to compare, but on my Titan RTX cards I just removed the 5MO resistors and replaced them with 3MO.
Very nice.

The result of my mod is very similar, adding the 8MO on top of the 5MO is equivalent to replacing it with a 3.077 mOhm resistor but I didn't need to de-solder the original. The difference with Turing is that it goes into emergency mode if you use a 2.5 mOhm resistor while Pascal was fine with it.
Asmodian is offline