Originally Posted by Martin778
I've had an 'accident' with nickel plated blocks, warm water with vinegar took off the coating in 2 days of normal use. Less dangerous to handle compared to acetone.
Originally Posted by Blameless
Acetone shouldn't do anything to nickel plating at all.
Nope no good neither did acetone both failed to put a dent in the nickel or chrome cold plate.
Good thing is doubt I needed to
The ek copper evo supremacy cpu cold plate is the same size as the ek x299 mono blocks cold plate is with the circle on it
So if nothing once I break down a evo I'll see what it's cold plate does on the ek mono block dry fit see where the plastic jet plate.. lines up at
Doubt ek did anything extraordinarily different except milling the circle on the base.