Originally Posted by Alastair
So you are running 1800 on the AIO? How long can you hold it for? Reckon it will sustain 1800 with upped power limits and cooler temps like say a custom block? Can you set P6 to = P7 or does there have to be a difference between the two? I am. So excited for my Vega. I really hope I can hit 1800 in my loop.
My loop is 360mm with Jetflo's in P/P and a 280mm with Corsair ML140s in P/P. All hooked up to a Lamptron controller. Fury's maintain 45C each underload at 1150MHz. I reckon the single Vega should hit about 40s maybe less even with OC considering the lower heat load in the loop?
My Vega 64 was in a custom loop with a single 360mm with an EK copper waterblock. This 1800Mhz is stable 24/7 but this is a bug when flashing back from the FE 8GB bios for some odd reason it runs at P7 all the time until the next reboot. I am able to replicate the bug 100% of the time. Don't expect to ever touch this frequency, you'll most likely see 1700-1730Mhz all the time.
I guess I wasn't clear on what I said, Vega 10 will never run P7 100% of the time since the stock air/AIO weren't designed for that high of a TDP. Unfortunately there isn't a way to get it to run at P7 all the time after reboots.