Overclock.net - An Overclocking Community - View Single Post - Noob here, Pump Speed and temps

View Single Post
post #3 of (permalink) Old 03-18-2019, 08:01 AM
New to Overclock.net
skupples's Avatar
Join Date: Apr 2012
Location: Fort Lauderdale
Posts: 20,224
Rep: 581 (Unique: 325)
do you have a flow sensor?

if not, start on the lowest setting, benchmark, note temps
repeat on consecutive settings until you see no gain from increased flow.

It tapers off pretty quickly, but I don't remember the target folks say to go for.

I'm only getting 120LPH outta 2x DDC running full tilt =\\

the min is like .5 GPM *(what I get with a 4 radiators, 3 blocks, and two PWM DDC)

R.I.P. Zawarudo, may you OC angels' wings in heaven.
If something appears too good to be true, it probably is.

Last edited by skupples; 03-18-2019 at 08:06 AM.
skupples is offline