Overclock.net - An Overclocking Community - View Single Post - Noob here, Pump Speed and temps

View Single Post
post #8 of (permalink) Old 03-18-2019, 07:52 AM - Thread Starter
mrsarden
New to Overclock.net
 
Join Date: Jan 2019
Posts: 8
Rep: 0
Quote: Originally Posted by skupples View Post
as stated, if you don't have a flow meter, then just use a staggered approach.

Start on the lowest speed, running all your blocks as hot as possible, take temps

bump up to the next speed, test, take temps,

etc

compare, win.

flow & pump are one of those HIGHLY oversold things here on OCN, kinda like PSUs, but worse.

More flow means almost nothing above .5, and literally nothing above 1.0. & the difference between the two are within the couple degrees at most.
thanks. will try and report back.
mrsarden is offline