Originally Posted by Abaidor
Not only that, he also has 2X GPUs and some Quick Disconnect (added restriction) on his loop....
I guess the following could be restricting your performance..
Fans? What fans are you using?
Radiators not getting enough fresh air...
What is your CPU block?
I might be wrong though.
the QDCs really do not add restriction to the loop. The QDC3s are quite high flow. But then Again, I have to turn the pump down so there is sufficient residence time in the rads for the crap to cool down. Too fast and the loop just runs hotter.
Anyway, it all comes off the HWBT and into a case soon... been looking for something like the corsair 1000D that does not cost $500!.
Originally Posted by GnarlyCharlie
Got my 7920X delidded last night, I'll put the lid back on tonight and see if it'll run. I got the block and shunt mod on the 2080Ti last night, too. Ran it just long enough without water to make shure I didn't bork the shunt mod. I bought the wrong dang resistors, instead of the solid end caps like the ones I used before, these had a tiny little metal tab on the bottom that just barely stuck out past the ends. PITA to solder these and I roached a couple in the process - good thing they are cheap and I bought 10. Now I have to tear down the loop on War Pig to get the TX out of it and put the 2080Ti in, and then build a loop for the 7920X rig with the TX in it.
I am sooo tempted to send you my 2080Tis for a clean mod...