Overclock.net - An Overclocking Community - View Single Post - What's the best Z390 motherboard for air-cooled overclocking that has a PS/2 port?
View Single Post
post #6 of (permalink) Old 03-21-2019, 10:55 PM - Thread Starter
Not new to Overclock.net
TwoCables's Avatar
Join Date: Dec 2008
Location: Minnesota
Posts: 77,823
Rep: 6215 (Unique: 3521)
Quote: Originally Posted by The Pook View Post
You're right, it doesn't have cut down audio, but it still has a marginally inferior VRM to the Taichi. Should still be fine for a 8700/9700K.

Ton of people smarter than me comparing Z390 boards here, worth a peek if you haven't checked it already.
4007 posts. Omg.

Yeah, the Taichi was the first board I checked out after discovering the lack of PS/2 ports on the AORUS boards because of what people say about its VRM. Should I be concerned that much about the VRM though if I'm only aiming for maybe 5 GHz with air cooling? Good air cooling, but still.

Quote: Originally Posted by The Pook View Post
Cringe way of saying baby that I started saying sarcastically and now I can't stop using it

Loneliness is a good thing to share with someone.

The virtuous spirit has no need for thankful approval, owning a certain conviction that what has been done is right.
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage)
ASUS P8P67 EVO B3 (UEFI ver. 1850)
MSI GTX 1070 Ti Gaming Titanium 8G
G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9
Hard Drive
250 GB Samsung 840 EVO (OS)
Hard Drive
3 TB Toshiba P300 (D: drive)
Optical Drive
Samsung SH-S243N 24x DVD Burner
Optical Drive
Samsung SH-S203N 20X DVD Burner
Power Supply
Corsair RM550x
Thermaltake Frio
CM 690
Operating System
Windows 10 Home
AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC)
Filco Majestouch 104-key Cherry MX Blues w/NKRO
Intellimouse Optical (1.1A) 1000Hz polling rate
It's just a mousepad
X-Fi Titanium HD
Klipsch ProMedia 2.1 (with 16 AWG Monster Cable speaker wires)
▲ hide details ▲
TwoCables is offline