Shift X Watercooled
Finally got around to watercooling my build that started off in post #6 https://www.overclock.net/forum/50-s...l#post26398028
Changed only a few things like adding an extra 1TB m.2 Samsung 970 Evo, removed all the 2.5" SSDs and upgraded the GPU to a 2080Ti. All the rest is the same as in the original post. Watercooling parts are all EK other than the rads which are HWL GTS (240mm+120mm) and the GPU block which is the Phantheks Glacier Strix 2080Ti. I did a few nice custom bales to connect the pump and the fan splitter and sleeved everything else other than the PSU cable set which was made by To-The-Wire.
This is my first hardline build and I had a strict deadline of 3 days to complete it - so things aren't 'prefect'. Unfortunately, when I first replaced the distilled water in the loop which I was running for a couple of days with a premixed clear coolant I had a bit of a disaster and the coolant foamed up and really messed up the loop. I've since flushed it with loads and loads of distilled water as I had no time to take the loop apart and deep clean every component (which is what is really required) so please excuse the slight staining in the blocks, res and tubes.
P.S. OS is Manjaro Linux
Last edited by qiUip; 03-24-2019 at 08:06 AM.