Originally Posted by ryan92084
The D is the dynamic so again it depends on which version of the o11 you are asking about, there are several. The air/dynamic/razer are the ones with potential clearance issues. They maintain a list gpu waterblock list for those models here
but unfortunately don't test heatkiller blocks but they have been pretty decent about answering questions if you contact them.
The older o11 models (like your link) are a little bigger and don't have the staggered motherboard tray. I thought their clearance was better but after poking around it might just be a little different.
Both PC-O11 and PC-O11D
have same specs as regards graphics cards clearance
. See image below. The same is with CPU cooler clearance: 150mm.
Update: If PC-O11's specs page says it is 150mm clearance for graphics card and if an 159mm card (Aorus RTX 2080 Ti WB) didn't fit inside PC-O11D (whose specs page says it is 159mm for VGA and 155mmm for CPU cooler), then PC-O11 is narrower than PC-O11D, right?
Anyway, what is important is how much Strix RTX 2080 Ti's size is increased by using a Heatkiller IV.
Last edited by lb_felipe; 05-16-2019 at 10:23 AM.