Overclock.net - An Overclocking Community - View Single Post - Phanteks Enthoo Evolv Shift/Shift X Owners Club

View Single Post
post #488 of (permalink) Old 05-17-2019, 08:53 AM
Netherworld
New to Overclock.net
 
Join Date: May 2019
Posts: 2
Rep: 0
Quote: Originally Posted by qiUip View Post
I’m afraid it will not. If you look at the first posts here, some of us has problems fitting a Strix 1080Ti which is 2.5 slots. I’ve recently tried a Strix 2080Ti (which is 2.75 I believe?) and there is no way it would fit in the bracket without modding. You could however cut off a bit of the bracket and probably make it fit..
Yes, 2080 Ti Strip seems to be same 54mm as the Nitro+ is. Which part of the GPU bracket do you mean? Supposing i install the Card with the backplate facing outside - as shown in the manual - do you mean i'd have to cut the part i have marked in the Screenshot?



https://imgur.com/UtpPtWD
Netherworld is offline