Overclock.net - An Overclocking Community - View Single Post - New Loop & Drain config suggestions
View Single Post
post #6 of (permalink) Old 05-21-2019, 12:35 AM
New to Overclock.net
Vlada011's Avatar
Join Date: May 2012
Location: Belgrade, Serbia
Posts: 1,982
Rep: 39 (Unique: 29)
Quote: Originally Posted by Shawnb99 View Post
I’d pick the second Radiator. More cooling means you can run your fans at a lower speed.

You are right, but my goals are not exactly 45-50C temps. If they stay below 60C that's fine for me.
I run Benchmark on ASUS GTX1080Ti Poseidon and temps were 49-55C.
That's fine for me.

Problem is because I desperately need VGA Holder.
With Vertical GPU Mount I don't need him. Now he is necessary and I don't want to pay some ugly RGB Aliexpress solutions.
I search for ASUS ROG-TUF VGA Holder because it's almost invisible and I saw guy who keep with same GPU as mine and fit perfectly.

Trashzone is correct. No matter where you install Drain Port liquid will stay in anything below him.
This radiator is maybe solution. New Alphacool NexXxoSS V2.

There is a two size ST30 and XT45. If he stay on bottom of case I suppose you need 90 angled adapter, male to male rotary and ball valve and you could turn ball valve in any direction if you have space, off course and G 1/4 Plug. I prefer Plug compatible with Allen Key, nothing else.
Attached Thumbnails
Click image for larger version

Name:	Capture.PNG
Views:	7
Size:	253.9 KB
ID:	270684  

Vlada011 is offline