Overclock.net - An Overclocking Community - View Single Post - [Official] AMD Radeon VII Owner's Club

View Single Post
post #1290 of (permalink) Old 05-21-2019, 04:27 AM
New to Overclock.net
Join Date: May 2014
Location: Australia
Posts: 480
Rep: 25 (Unique: 23)
Current bolts are 3.6mm
There is a Bunnings Warehouse 30k away but there website lists nothing under 6mm but I may go take a look around town tomorrow anyway.
Online Ebay stores list 3mm x 50mm which would be just long enough if I did away with the springs but still too fat to reuse the original backplate from behind the core on the Radeon VII and would take a week to arrive.

The laser cutters were going to charge me almost $200 to make a new mount plate for the old GPU block so that isn't worth it.
Dasa is offline