Overclock.net - An Overclocking Community - View Single Post - EK Vector RTX bacplate very hot

View Single Post
post #1 of (permalink) Old 05-21-2019, 06:18 AM - Thread Starter
mr.freud
New to Overclock.net
 
Join Date: May 2019
Posts: 5
Rep: 0
EK Vector RTX bacplate very hot

Hi.
2 days ago I installed EK waterblock on my 2080ti. The loop consists of 2 360 rads - it cools cpu(5930k) and gpu(2080ti).
My temps seem to be good - cpu is under 55c(load) and gpu is under 45c(70-90% load while gaming). idle temps are - 30-35 for CPU cores and 27 for the GPU.
But when I touch my GPU backplate (durring load) - it seems to be hot. I don't have means to measure it but I'd say it's definitely hotter than 60c. Also it really cool above the GPU die but the hot spot is to the right of it closer to where the 2 PCI power cables attached.
Is it ok or should I worry?
Also I switched by back fan to intake so it cools the backplate.

sry for bad english

Last edited by mr.freud; 05-21-2019 at 06:26 AM.
mr.freud is offline