Overclock.net - An Overclocking Community - View Single Post - New Loop & Drain config suggestions

View Single Post
post #7 of (permalink) Old 05-30-2019, 04:54 PM - Thread Starter
New to Overclock.net
Join Date: May 2019
Posts: 2
Rep: 0
Thank you for all your feedback. I will definitely be buying that syringe. When redoing this loop I was replacing all 6 fans and therefore had everything in pieces. So draining was not an issue this time but it will be next time. I did the rebuild before most of these replies came in, but for the most part all was followed. Also I have not found a bracket that worked properly for the vertical GPU. I did buy the one from Lian-li, but it won't work wi th a bottom rad. There was a guy who custom made his, he was the first person to do a build log with this case, and his stuff certainly helped me in building this.

Anyway this is what is looks like now, excuse the lighting, I had to do some filters to drown out the side LEDs I have.

FYI, CPU temps are actually higher than the previous build, but GPU temps are -20c. So hashcat and l0phcrack will be happy.
Attached Thumbnails
Click image for larger version

Name:	front.jpeg
Views:	7
Size:	952.0 KB
ID:	272300  

Click image for larger version

Name:	side.jpeg
Views:	7
Size:	4.08 MB
ID:	272302  

Click image for larger version

Name:	2019-05-30_201106.png
Views:	4
Size:	26.5 KB
ID:	272308  

Last edited by jopeness; 05-30-2019 at 05:11 PM.
jopeness is offline