Overclock.net - An Overclocking Community - View Single Post - My New FreeNAS Server

View Single Post
post #1 of (permalink) Old 05-31-2019, 05:13 AM - Thread Starter
Dopamin3
New to Overclock.net
 
Dopamin3's Avatar
 
Join Date: Jan 2009
Location: PA
Posts: 10,846
Rep: 1358 (Unique: 1025)
My New FreeNAS Server

I just got done building a new FreeNAS to replace my older one. The purpose was to have more cores and RAM to help with Plex transcoding, be able to run more bhyve virtual machines, and have some more storage space available with the possibility to add even more. I am slowly but surely converting all my media (mostly H264) into H265/HEVC to optimize the space the files take, which really pegs the CPU. My Xeon was starting to struggle with a high number of transcodes at the same time in addition to my VMs and everything else going on. Side note, can't wait for the 3900X or even better the 16c/32t for AM4 that is coming out which will go in my personal desktop so it just flies through the transcoding from H264 to HEVC. 2700X is okay but when you're converting tons of files any time saved would be better.

Specs on the server are:

SuperMicro SuperChassis 933T-R760B- a 3U rack mount server case with 15 hot swappable SATA and triple redundant 760W power supply. Plenty of airflow.
Asrock X370 Taichi- I had this before I upgraded to my Asus C7H. It's got an amazing VRM, 12k capacitors, supports ECC RAM, POST code readout, and 10 SATA ports. Currently I have all 10 SATA occupied, but if I add more drives I will need to get something like the LSI 9207-8i which is no problem. I had to remove the big white shroud going across the left side of the motherboard to fit the fans from the case in. It was very easy to do and was just held in place by screws on the back
AMD Ryzen 1700- 8c/16t perfect for my needs
Stock cooler from the 2700X-, slightly better than the 1700 cooler and I had it kicking around since I have a Scythe Mugen 5 on my 2700X
4 x 16GB (64GB) Crucial CT16G4WFD8266- all 4 sticks run fine at the rated 2666MHz C19 and are supported in ECC mode by the Asrock board. ECC is essential for my environment
Visiontek 5450 1GB- installed in the bottom PCIe slot since I'll use the X8/X16 slots for 10GbE or HBA for additional storage down the road. This has no fan which is nice, and was basically only used for the initial installation of FreeNAS and in the future if I ever need to make BIOS changes. Everything I do is either SSH or FreeNAS webGUI
10 x Toshiba X300 5TB HDDs- they are configured in a ZFS RAIDZ3 so I have redundancy that 3 drives can fail with a usable storage of about 35TB. With lz4 compression enabled, I should be able to store a little bit more than that. They're cheap, they're fast and noisy so I hope I don't need to replace them too often for failures. I have one extra sitting around (already verified all drives were good with long SMART tests) in case of failure.
2 x 32GB Silicon Power Ultima U02 Flash Drives- used in a mirror for the operating system. I stocked up on these when they were I think $6 or $7 for a 2 pack, so I'll be ready to replace them if they die. FreeNAS works fine off a flash drive, and the large storage allows me to keep many previous versions of FreeNAS if I ever upgrade and need to rollback.
UPDATE: Samsung PM961 128GB MLC M.2 NVME SSD for boot drive- FreeNAS no longer boots and loads into RAM like previous versions so flash drives are no longer recommended. I got a good deal on Amazon on this so moved over to it.
OS: FreeNAS 11.2-U4.1- FreeBSD is rock solid, and openZFS is one of the best filesystems. In addition to the various jails (all manually configured jails, no FreeNAS plugins here) I have for things like Plex, Tautulli, Transmission torrent, etc... I also run a few bhyve VMs with Ubuntu 18 server, (PiHole DNS) Ubuntu 16 server (Unifi controller) and more to come. FreeNAS serves up some SMB / NFS shares for various machines on my network. I use netdata to monitor statistics. I automate short SMART testing, long SMART testing, and ZFS scrubs and get email reports to monitor server health.

Pictures of the inside of the server and the back can be found here: https://imgur.com/a/NYrlmp8

I didn't take pictures of the front, but it looks like this (except 10 of the HDD lights are constantly blinking depending on what's going on lol): https://www.memory4less.com/images/p...T-R760B-lg.jpg


Any feedback or questions are welcome!

Ryzen Reborn
(15 items)
Alura :)
(11 items)
FreeNAS
(9 items)
CPU
2700X
Motherboard
ROG CROSSHAIR VII HERO (WI-FI)
GPU
SAPPHIRE NITRO+ Radeon RX Vega 64
RAM
G.Skill TridentZ RGB F4-3200C14D-32GTZR
Hard Drive
Plextor PX-1TM8SeG
Hard Drive
2 x Samsung HD103SJ in RAID1
Hard Drive
Micron 1100 2TB SSD
Power Supply
SeaSonic Platinum SS-860XP2
Cooling
Corsair H100i v2
Case
Fractal Define C TG
Operating System
Windows 10 Pro x64
Monitor
Pixio PX277
Keyboard
Logitech G510
Mouse
Logitech G5
Mousepad
XTRAC Ripper
CPU
i7 2700k
Motherboard
Asus P8Z68-V Pro
GPU
Gigabyte GTX 780 Windforce OC
RAM
4 x 4GB G.Skill Sniper 1866mhz
Hard Drive
Mushkin Enhanced Chronos 240GB and WD Black 1TB
Optical Drive
Asus DRW-24B1ST
Power Supply
Thermaltake Tough Power TP-750P 750W Gold
Cooling
Cooler Master Hyper 212 EVO
Case
Cooler Master HAF 932
Operating System
Windows 7 Ultimate x64
Monitor
2 x Acer 24 inch IPS
CPU
Intel Xeon E3-1245 v5
Motherboard
SuperMicro X11SSM-F-O C236
GPU
Integrated
RAM
2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16
Hard Drive
5 x 8TB Seagate IronWolf Pro in ZF2 Array
Power Supply
EVGA SuperNOVA G2 550W Gold
Cooling
CoolerMaster Hyper 212 Evo
Case
Fractal Design Node 804
Operating System
FreeNAS 11
▲ hide details ▲



Last edited by Dopamin3; 07-16-2019 at 05:54 PM.
Dopamin3 is online now