Overclock.net - An Overclocking Community - View Single Post - Hold MSI RTX 2080 Ti Trio with one screw?

View Single Post
post #12 of (permalink) Old 06-19-2019, 03:17 PM
Martin778
New to Overclock.net
 
Martin778's Avatar
 
Join Date: Feb 2012
Location: the Netherlands
Posts: 1,349
Rep: 15 (Unique: 15)
I would grab a generic anti sag kit, it looks like you can mount it on the right side of the card to make it less visible.
Even without using the anti sag kit and if a case screw holding the gpu comes lose, it shouldn't damage the PCI-E slot or the GPU - the card will probably hang on the HDMI/DP plug of the monitor cable against the case.

Core i9 9900K @ 5.2 || EVGA Z390 DARK || 2x8GB G.Skill TridentZ RGB 4600 C18 @ 4266 C17 || GPU: EVGA Kingpin RTX2080Ti @ 2130MHz || Samsung 970PRO 1TB + 860EVO 2TB || Lian Li O11 Dynamic White || Corsair AX1600i || Screen: LG B8 OLED 55 and LG 34GK950F
Corsair H150i PRO + Noctua NF-A12x25
Martin778 is offline