Originally Posted by EniGma1987
Looks like they are showing their block with no bottom and mounted directly against the IHS as the bottom of the unit (the brown piece is the IHS?)?
Or is the IHS supposed to be the turquoise color piece and the bottom of this is the brown piece?
Another key feature of JetCool cooling is that the cooling fluid isn't passed over a surface like a heatsink or cold plate but instead "aimed directly at the surface". Check out the diagram below to see the tech comparison between traditional and JetCool cooling.
look at the thermal resistance legends on the sides:
typical set up:
it looks to "squirt" cooling fluid directly on the die.
(incoming squirting jokes YO!)
this, from what i see in the article and that image, is for system integrators. since dies are not all the same sizes its going to be "one use/product" cases.
Remember the golden rule of statistics: A personal sample size of one is a sufficient basis upon which to draw universal conclusions.
Upload the computer to Dropbox and provide a link to it so others may download it to examine and give advice for repairs.
Asus P8Z77-V Pro
PNY 1311 240Gb
EVGA SuperNova 750 G2
Stryker M [hammered and drilled]
Ducky Zero [blues]
Klipsch ProMedia 2.1
▲ hide details ▲