Overclock.net - An Overclocking Community - View Single Post - Sffpc build recommendation for rendering

View Single Post
post #6 of (permalink) Old 07-31-2019, 02:00 PM
AlphaC
⤷ αC
 
AlphaC's Avatar
 
Join Date: Sep 2012
Posts: 11,184
Rep: 904 (Unique: 590)
If RTX 2070 and RTX 2060 Super are the same price go for RTX 2070 as the RTX 2060 Super is a cut down RTX 2070 (TU106 GPU die). Normally those are $400 though.

The lowest I'd go is with RTX 2060 non-Super which is $330-350ish these days , that has 192-bit memory bus and 6GB GDDR6 VRAM. I don't think you're going to find anything worthwhile in the long run at $300 , because on the gaming GPU side that's GTX 1660 Ti and on the professional side it's Quadro P1000 which is below GTX 1050 level (it's a GP107 with 640 CUDA). There might be lower Turing parts in the pipeline since on notebook/mobile there are RTX 3000 (TU106 die with 2304 CUDA similar to RTX 2070, 6GB GDDR6 on 192-bit memory bus), T2000 (TU117 die , 4GB GDDR5 VRAM so not worth it) and T1000 parts. Normally all Quadros are around 2x the gaming counterparts due to binning for significantly lower power.

(https://www.anandtech.com/show/14421...-for-notebooks)

If it's Autodesk with Revit architecture and rendering is involved the Ray tracing cores are going to accelerate the workflow so much that GTX 1660 Ti is pointless.

► Recommended GPU Projects: [email protected] , [email protected] (FP64) (AMD moreso) ► Other notable GPU projects: [email protected] (Nvidia), GPUGrid (Nvidia) ► Project list



Last edited by AlphaC; 07-31-2019 at 02:04 PM.
AlphaC is offline