Overclock.net - An Overclocking Community - View Single Post - USB mouse hard overclocking (2000 Hz+)
View Single Post
post #673 of (permalink) Old 11-02-2019, 04:35 AM - Thread Starter
New to Overclock.net
SweetLow's Avatar
Join Date: Jan 2016
Posts: 487
Rep: 55 (Unique: 31)
Quote: Originally Posted by 1ms_hand2eye View Post
Great thread!
First of all, the low latency for the clicks has very low importance. Much more important is low dispersion. And luckily overclocking reduces the last.

>Secondly, there are claims of optical keyboard switches being the lowest latency.
Right hardware has zero latency in any case:
My dialog with M1st.

>Fourthly, is there any evidence USB4 will bring lower latency? I haven't seen any.
1. There is no such thing as USB4. At all.
2. There is no such thing as USB3 input devices.
3. USB2.0 (High Speed) input devices are very rare beasts:
Literally nothing to talk about.

>Fifth, Dan seems to be claiming that the latency in modern computers is partially coming from the components between the screen & input devices.
Yes, of course.
But don't trust all that you will read there :
My dialog with HAGGARD and VolsAndJezuz

>Sixth, anyone here overclocking to 2000Hz+ on Linux?
and my answers below

>Seventh, do you know if you can overclock the polling rate of an Apple magic trackpad - or any other top trackpads? I've had trouble finding any info on increasing the polling rate of trackpads.
RTFM once again - what can be overclocked.

and JFYI:
Good reading about "latency".

P.S. Good post for links to it

Last edited by SweetLow; 11-02-2019 at 04:39 AM.
SweetLow is online now