Overclock.net - An Overclocking Community - View Single Post - Fluid In resevoir End Cap Screw Threads
View Single Post
post #1 of (permalink) Old 01-15-2020, 05:30 AM - Thread Starter
islhopr
New to Overclock.net
 
Join Date: Apr 2019
Posts: 2
Rep: 0
Fluid In resevoir End Cap Screw Threads

I recently got a 150 Phoyba Reservoir which is mounted horizontally to the top of my case, and am I am using blue XSPC Fluid with the system. On one side the thread where the cap screws into the reservoir has some of the fluid inside in the actual threads,where the end cap screws into the acrylic, where the other side doesn't? both caps are tight and It does not leak, but at the bottom it seems the fluid extends through all the threads. Is that common or is that something I should be concerned about > ?

Last edited by islhopr; 01-15-2020 at 05:51 AM.
islhopr is offline