My Core i9 9900k Faulty?
i dont know if its my cpu which causing the crashes so..
i will get stright to the point.
i installed new hardware:
Gigabyte Auros elite z390
core i9 9900k
16x2GB DDR4 kingstone hyperx 2666mhz (32GB total)
intel Liquid cooling.
on an old hardware:
thermeltek 600w toughpower
old mid tower case.
THE PROBLEM IS:
after i connected all it worked for about 2 hours, i even played a demending game for about 30min and exit it.
tested to see cpu temp it was around 32c, everything seemed fine, then it crashed after a while, everytime it logged to win10 it crashed again.
safemode worked, i then decided to format the pc, after formating and installing new win10. crashed again everytime the win10 first setup was loading.
now it is crashing even when i boot form windows usb installation.
Things i Have tried:
changing Memory slots, and using 1 stick at a time.
changed some settings in bios xmp profile and such. (reset to defult bios setting after it did not work).
disconnected everything except the MOBO and CPU and Memory.
tried switching hard drives.
i ran memtest everything is fine.
checked the bios everything is fine, cpu temp, RAM frequency, and every part i connected is showing up and seems fine.
i tried tighten the screws of the cooling pump.
i tried switching the cpu header to opt.
STILL DONT KNOW WHAT IS THE PROBLEM!