[Official] 5GHz Overclock Club - Page 863 - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] 5GHz Overclock Club

Reply
 
Thread Tools
post #8621 of 8652 (permalink) Old 06-24-2019, 11:38 PM
New to Overclock.net
 
Imprezzion's Avatar
 
Join Date: Jul 2010
Location: Gorredijk, Holland
Posts: 2,256
Rep: 93 (Unique: 80)
So, low 70's in games / normal workload at 1.376v isn't something that I should worry about. I don't wanna overly degrade the CPU and I'm used to keeping my CPU's under 70 in normal load just to prevent that. Not that I'm keeping it very long as I wanna go to either X570 or Z390 for the ARGB support on those boards (Z170/270 only has analog 12V RGB) but still,. No need to hurt the CPU right?

Cars:
-Crashed: (not my fault ) '94 Nissan 100NX GA16DE (a.k.a. NX1600).
-Sold: '00 Nissan Primera P11-144 QG18DE, '97 Honda Prelude F20A4.
-Current: '03 Suzuki Ignis Sport 1.5 M15A & '03 Peugeot 206CC 2.0 RFN fully riced.
Full-On Rainbowbarf
(15 items)
CPU
i9 9900K @ 5.025Ghz 1.325v
Motherboard
MSI MEG Z390 ACE
GPU
MSI RTX 2080 Gaming X Trio @ 2085 / 8200 @ 1093mv
RAM
Corsair Vengeance RGB B-Die @ 4020 16-17-17-28-270-2T 1.50v
Hard Drive
Samsung 850 EVO 500GB x2
Power Supply
Seasonic Focus Plus Gold 750W
Cooling
Cooler Master ML360R ARGB push-pull w/ MF120R's
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro X64
Monitor
Samsung S27B350H @ 1080p 75Hz OC
Monitor
Samsung S23B350H
Keyboard
Logitech G710+
Mouse
Trust GXT31
Mousepad
Corsair MM300 Large
Audio
Steelseries Siberia V2
▲ hide details ▲
Imprezzion is offline  
Sponsored Links
Advertisement
 
post #8622 of 8652 (permalink) Old 06-25-2019, 07:28 PM
New to Overclock.net
 
DiGiCiDAL's Avatar
 
Join Date: Aug 2012
Location: Las Vegas
Posts: 2,703
Rep: 143 (Unique: 106)
Quote: Originally Posted by Imprezzion View Post
So, low 70's in games / normal workload at 1.376v isn't something that I should worry about. I don't wanna overly degrade the CPU and I'm used to keeping my CPU's under 70 in normal load just to prevent that. Not that I'm keeping it very long as I wanna go to either X570 or Z390 for the ARGB support on those boards (Z170/270 only has analog 12V RGB) but still,. No need to hurt the CPU right?

I wouldn't worry too much about that voltage and temp... it might degrade eventually, but not likely before a 7700K is 'obsolete'. Certainly not before you upgrade to X570/Z390... unless you do a bunch of benching as well as gaming.

My 3770K ran 1.43V @ 5 with similar load temps for 5 years and actually got a little better with age (when I pulled it, it was able to be stable at 1.39 @ 5). Admittedly an apples to oranges comparison since it's not the same chip... but I'd hate to think that Intel produced significantly less durable products in 2017 than they did in 2011.
DiGiCiDAL is offline  
post #8623 of 8652 (permalink) Old 06-25-2019, 07:31 PM
Old and Decrepit
 
JustinThyme's Avatar
 
Join Date: Dec 2016
Location: Princeton
Posts: 556
Rep: 30 (Unique: 23)
^^^^you will get enough before its obsolete. Keep in mind these things were meant to run on air and the thermal limit is well above your loaded temps.

Das Beast
(29 items)
CPU
I9 9940X
Motherboard
Asus Rampage VI Extreme
GPU
Asus Strix 2080 Ti OC
GPU
Asus Strix 2080 Ti OC
RAM
Corsair Dominator Platinum CMD64GX4M8X3800C19
Hard Drive
Samsung 960 Pro
Hard Drive
Samsung 850 EVO
Hard Drive
Intel 905P
Power Supply
Corsair AX1500i
Cooling
Aquaero 6 pro controller
Cooling
Corsair SP120 PWM x 11
Cooling
Heatkiller IV pro
Cooling
Heatkiller Tube 200
Cooling
2x Phanteks Strix 2080ti blocks
Cooling
EKWB 480 XE
Cooling
EKWB 480 PE
Cooling
EKWB 360XE
Cooling
Corsair LL 120 PWM X8
Cooling
D5 pumps x2 in serial bitspower head with mod kit
Cooling
Heatkiller VRM block
Case
Phantek Entoo Elite Black
Operating System
WIN 10 Pro
Monitor
ASUS PG34Q
Keyboard
ASUS Core
Mouse
Asus spatha
Mouse
Asus Sheath
Audio
Audio Engine A5+
Audio
SVS1000 Sub
Audio
Audio engine 192kBPS DAC
▲ hide details ▲
JustinThyme is offline  
Sponsored Links
Advertisement
 
post #8624 of 8652 (permalink) Old 07-02-2019, 03:53 AM
alidarkstone(alikaratas)
 
alidarkstone's Avatar
 
Join Date: Jan 2010
Location: TURKEY
Posts: 52
Rep: 3 (Unique: 3)
Hi,

And my Results : https://valid.x86.fr/0pbwt1







instagram @alidarkstone

https://valid.x86.fr/cache/banner/0pbwt1-6.png
CPU
Xeon 5620
Motherboard
Rampage III EXTREME
GPU
GALAXY GTX480
RAM
Kingston HyperX 2000mhz CL8 6GB
Hard Drive
2xWD CAVIAR BLACK 500GB + PATRIOT INFERNO 60GB
Optical Drive
ASUS DVD+RW
Power Supply
ENERMAX REVOLUTION 1050W 85+
Case
TAGAN BLACK PEARL A+
Operating System
Windows 7 Ultimate X64
Monitor
ZALMAN TRIMON 3D 22"
Keyboard
Microsoft X6
Mouse
CYBER SNIPA CYBORG
Mouse
A4 TECH X7
▲ hide details ▲
alidarkstone is offline  
post #8625 of 8652 (permalink) Old 07-02-2019, 03:59 AM - Thread Starter
Lister
 
alancsalt's Avatar
 
Join Date: Oct 2009
Location: Great Southern Underland
Posts: 13,157
Rep: 298 (Unique: 183)
Quote: Originally Posted by alidarkstone View Post
Hi,

And my Results : https://valid.x86.fr/0pbwt1







instagram @alidarkstone
From page 1 of this thread:
(When u do a CPU-Z validation, just put your Overclock.net name in the "Name" field instead of your "Computer Name" between clicking "validate" and "submit".)
Rules to be accepted in the Club are easy. Post (don't PM) your CPU-Z Validation Link (not a screen shot) with your OCN Forums name in the NAME Field. See the Ani-Gif below for details and instructions. While I would probably accept BillyBob-PC if the OCN User Name was BillyBob, BillsPC would not be accepted. Your ENTIRE OCN User Name must be in the submitted by field.

So, if you could do another validation with alidarkstone in the name field, it would be accepted....
alancsalt is offline  
post #8626 of 8652 (permalink) Old 07-02-2019, 04:02 AM
alidarkstone(alikaratas)
 
alidarkstone's Avatar
 
Join Date: Jan 2010
Location: TURKEY
Posts: 52
Rep: 3 (Unique: 3)
Quote: Originally Posted by alancsalt View Post
From page 1 of this thread:
(When u do a CPU-Z validation, just put your Overclock.net name in the "Name" field instead of your "Computer Name" between clicking "validate" and "submit".)
Rules to be accepted in the Club are easy. Post (don't PM) your CPU-Z Validation Link (not a screen shot) with your OCN Forums name in the NAME Field. See the Ani-Gif below for details and instructions. While I would probably accept BillyBob-PC if the OCN User Name was BillyBob, BillsPC would not be accepted. Your ENTIRE OCN User Name must be in the submitted by field.

So, if you could do another validation with alidarkstone in the name field, it would be accepted....
alidarkstone (in English) and alikaratas (in Turkish) same person. Its me check instagram or hwbot profiles. I will edit my profile details.

https://valid.x86.fr/cache/banner/0pbwt1-6.png
CPU
Xeon 5620
Motherboard
Rampage III EXTREME
GPU
GALAXY GTX480
RAM
Kingston HyperX 2000mhz CL8 6GB
Hard Drive
2xWD CAVIAR BLACK 500GB + PATRIOT INFERNO 60GB
Optical Drive
ASUS DVD+RW
Power Supply
ENERMAX REVOLUTION 1050W 85+
Case
TAGAN BLACK PEARL A+
Operating System
Windows 7 Ultimate X64
Monitor
ZALMAN TRIMON 3D 22"
Keyboard
Microsoft X6
Mouse
CYBER SNIPA CYBORG
Mouse
A4 TECH X7
▲ hide details ▲
alidarkstone is offline  
post #8627 of 8652 (permalink) Old 07-02-2019, 04:15 AM - Thread Starter
alancsalt is offline  
post #8628 of 8652 (permalink) Old 07-02-2019, 04:43 AM
alidarkstone(alikaratas)
 
alidarkstone's Avatar
 
Join Date: Jan 2010
Location: TURKEY
Posts: 52
Rep: 3 (Unique: 3)
Not Required. Its me. Whatever. I will post new test results with Phobya Radiator

https://valid.x86.fr/cache/banner/0pbwt1-6.png
CPU
Xeon 5620
Motherboard
Rampage III EXTREME
GPU
GALAXY GTX480
RAM
Kingston HyperX 2000mhz CL8 6GB
Hard Drive
2xWD CAVIAR BLACK 500GB + PATRIOT INFERNO 60GB
Optical Drive
ASUS DVD+RW
Power Supply
ENERMAX REVOLUTION 1050W 85+
Case
TAGAN BLACK PEARL A+
Operating System
Windows 7 Ultimate X64
Monitor
ZALMAN TRIMON 3D 22"
Keyboard
Microsoft X6
Mouse
CYBER SNIPA CYBORG
Mouse
A4 TECH X7
▲ hide details ▲
alidarkstone is offline  
post #8629 of 8652 (permalink) Old 07-02-2019, 05:42 AM
New to Overclock.net
 
Imprezzion's Avatar
 
Join Date: Jul 2010
Location: Gorredijk, Holland
Posts: 2,256
Rep: 93 (Unique: 80)
Soon. My 9900K obviously has no issues running 5.025 all core HT on AVX offset 0 stable but it gets a bit hot.. I mean I was worried about my 7700k last few posts but this thing.. my God.. 92c hottest core in Prime95 29 AVX enabled on 1.315v...

It's stable in daily workloads so far tho but I'm not testing with AVX again on this poor thing. Miracle my boards VRM doesn't start screaming for help lol. Only barely hits 90's with zero airflow on the VRM sinks.. (MSI Z390 MEG Ace).

I can validate CPU-Z a lot higher tho. Should I try to get a 6ghz all core HT off validation? It'll survive a boot or 2 on 1.60v.. I hope haha

Cars:
-Crashed: (not my fault ) '94 Nissan 100NX GA16DE (a.k.a. NX1600).
-Sold: '00 Nissan Primera P11-144 QG18DE, '97 Honda Prelude F20A4.
-Current: '03 Suzuki Ignis Sport 1.5 M15A & '03 Peugeot 206CC 2.0 RFN fully riced.
Full-On Rainbowbarf
(15 items)
CPU
i9 9900K @ 5.025Ghz 1.325v
Motherboard
MSI MEG Z390 ACE
GPU
MSI RTX 2080 Gaming X Trio @ 2085 / 8200 @ 1093mv
RAM
Corsair Vengeance RGB B-Die @ 4020 16-17-17-28-270-2T 1.50v
Hard Drive
Samsung 850 EVO 500GB x2
Power Supply
Seasonic Focus Plus Gold 750W
Cooling
Cooler Master ML360R ARGB push-pull w/ MF120R's
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro X64
Monitor
Samsung S27B350H @ 1080p 75Hz OC
Monitor
Samsung S23B350H
Keyboard
Logitech G710+
Mouse
Trust GXT31
Mousepad
Corsair MM300 Large
Audio
Steelseries Siberia V2
▲ hide details ▲
Imprezzion is offline  
post #8630 of 8652 (permalink) Old 07-02-2019, 05:46 AM - Thread Starter
Lister
 
alancsalt's Avatar
 
Join Date: Oct 2009
Location: Great Southern Underland
Posts: 13,157
Rep: 298 (Unique: 183)
Stability and/or all cores are not required for this thread. If you can get an unborked validation ..... conforming to the requirements set out on this thread's first page as well, of course...

Last edited by alancsalt; 07-02-2019 at 05:50 AM.
alancsalt is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off