Google Spreadsheets In Your Post - Updated for Huddler!
You can now embed Google Spreadsheets into your posts. This is beneficial for people that create, update, and maintain lists of data for others to view in the forums.
Publishing the Spreadsheet
The following is how to correctly publish the spreadsheet your working on so that you can include the link in your post.
1) First you need to go to File> "Publish to the web...":
4) The box below should now contain the code you need. Copy it all.
5) To paste the HTML code, you need the HTML Source editor. To use this, you must first switch from the default BBCode editor to the Rich Text editor.
To do this, go to "My Profile"> "Edit Account Settings"> "Site Preferences". Change from BBCE to RTE:
6) Now, when you post, simply click the "Source" button on your editor:
7) Now, paste the code from point 4, and you're set. :thumb:
Note: You can change the width='xxx' height='xxx' options to suit your spreadsheet if you wish. :)
CPUPhenom II X6 1090T @ 4.0Ghz
MotherboardASUS M4A89GTD PRO
Hard DriveCrucial M550
Hard DriveSeagate IronWolf 8TBx2
Power SupplyCM 1000M
CoolingCM Hyper 212+
Operating SystemWindows 7 Professional x64
KeyboardLogitech MX3000 Laser
MouseLogitech VX Revolution
Quote:Originally Posted by BFRD in suggestions forum
CPUIntel Core i7 6700k
GPUEVGA GTX1070 SC ACX3.0
RAM16GB EVGA DDR4-2400mhz (2x8GB)
Hard DriveSamsung 840 Evo 120GB
Hard DriveWD 1TB
Hard DriveWD 500GB
Hard DriveWD 250GB
Power SupplyCorsair HX520
CoolingCooler Master Hyper TX3
CaseFractal Design Define R5
Operating SystemWindows 10 x64
"You make a living by what you get. You make a life by what you give." --Winston Churchill
Lot less work.
&w=100 (This is percent, substitute the 100 for any number from 1-100)
&h=600 (This is pixel height, substitute the 600 for any number from 1-whatever, but be reasonable)
&gid=0 (This is the sheet number, substitute the 0 for any sheet number)
&single=true (This will display a single sheet)
and just wants it clarified a bit more
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|