Windows 10 /MyDigitalSSD BPX 80mm (2280) M.2 PCIe Gen3 x4 NVMe SSD Issues
MyDigital NVMe SSD BPX 480
Core i7 6700K
Asus Maximus IX hero
Windows 10 home
Purchased the BPX 480 and did afresh install of Windows 10 install from my (retail) Windows 10 USB drive last August and it has been flawless up until Wednesday. I used the computer Monday and Tuesday with no issues booting or shutting down. On Wednesday, it booted to “automatic repair” every time. One time I was able to boot to safe mode but could not be repaired from their either. As a side note, my Asus Maximus IX Hero board was having some serious issues. Dead Ethernet as well as others.
Last night I installed a new MSI MSI Z270 MPOWER GAMING TITANIUM motherboard, did a fresh Windows 10 install from my (retail) Windows 10 USB drive and then proceeded to update the bios and install all the motherboard drivers. Which went without any issues.
Everything seemed to be going well as windows started pulling down updates, installing them and rebooting. Then the machine booted to the “automatic repair” and again I could not get it to successfully repair. I even tried having it repair off of the (retail) Windows 10 USB drive which also did not work.
At this time I suspect the NVME SSD is the problem
Any thing else I can look at?
CoolerMaster H500M - MSI Z390 MEG Ace - Core i7 9700K – Noctua NH-D15 - EVGA RTX 2080 FTW3 – 16GB Corsair Vengence LPX DDR4 3200 - 512GB Samsung 960 Pro m.2 NVMe - 500GB Samsung 850 Evo m.2 - EVGA Supernova 1000G3 - Logitech G900 Chaos Spectrum - Logitech G513 - Alienware 3418DW