Originally Posted by JackCY
How do you run trim?
Each board has specs that say where the M.2 is connected to. Going via chipset will be slower on many boards. Even x570 doesn't have a gigantic connection to feed multiple M.2s at once.
If you want the quick results of "advertised" speeds, run CrystalDiskMark.
Hi,I've only had so far one m.2 connected at a time not both
x99 only has one m.2 port under the pci-e slot 2
I've used the same m.2 port location on x299 rig
It's just bazaar x99 is a little faster read is all
The 1tg is fairly equal but only at around 2500 not close to 3k like I was expecting from the ssd spec's
None except x99 even came close to 3k
But the 512gb ones read faster than the 1tb which is not the way it should be
Looks like I'll be swapping the other two in x299 into my x99 and see what they do and x99's into x299 lol just to be sure
Either way flashed a new bios on x299 finally released one but first test at 4.2 and 3200C14 mem was about the same as before.