[Sponsored] My TH-10 magnum to the Bitspower's exhibition booth @ Computex 2013 - Overclock.net - An Overclocking Community
Forum Jump: 

[Sponsored] My TH-10 magnum to the Bitspower's exhibition booth @ Computex 2013

Reply
 
Thread Tools
post #1 of 119 (permalink) Old 05-26-2013, 06:57 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)

I'm really proud to announce that my caselabs th10 magnum will be shown during the computex at the bitspower booth.






A couple of years ago i had enough of regular big tower, and i finally decided to buy a caselabs. I live in Italy so shipping cost and customs fees were a pita but when i finally saw my brand new case I though " who cares it's worth it", and after two and a half years i still think the same.

My original plan was to use a double socket board with brand new sandy bridge-e xeons, but when i discovered that oc was basically impossible, i turned to this( with this move i also saved 2500€):



And this is the very first version of my th10:








For a very short period of time i even used aurora tharsis red:



And then the 680 was released and after the 480 hc and 580 hc this was inevitable:



So i completed my collection:



Turn it on:



A look to the front:



With the release of this:



The time had come for a major restyle, starting with the rad on the top:



Naked:



Completed:



Some changes on the motherboard:



A couple of flowmeter:





So this is the 2.0 version triple loop:





For this kind of build at least a sli is required:



Some BIG news directly form Taiwan:



I was lucky to have those before ppcs, frozencpu, and the great Tom Logan of Time to live customs:



I also decided to move from:



to:



Another hardware update:



With the biggest waterblock i've ever seen:





This huge case allows me to revive an old 560, with some work :



For the first time i painted the waterblocks of the motherboards to fit my deluxe white and the deep red blood fittings:




also the backplate of the classifieds:



and a d5 cover:



First with just one classi:


then with two:



Some serious sleeving is required:





And this is the 3.0:









I wasn't satisfied, the cpu area was too messy so i started my relationship with c47 and acrylic tubes:





and with di-noc:


The next step was to remove almost all the rubber tubes:



















I didn't remove the rubber tubes on the vgas loop because of this:



poor quality control by swiftech, and i don't understand why they keep doing this:

Juthos is offline  
Sponsored Links
Advertisement
 
post #2 of 119 (permalink) Old 05-26-2013, 10:35 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)
I usually send pictures to Bitspower to show my progress, after i finished my last refresh they asked me some original pictures for a commercial promotion, and after a couple of weeks they requested to ship my rig to Taiwan because they wanted to show it @ computex 2013. I was at the same time proud and shocked, my system weights almost 50 kg. I gave consent to ship it and we started to discuss how to change my systems.
Juthos is offline  
post #3 of 119 (permalink) Old 05-27-2013, 09:26 PM
New to Overclock.net
 
onevoicewild's Avatar
 
Join Date: Dec 2012
Posts: 277
Rep: 22 (Unique: 21)
Sir your membership in the plumbers Union has been approved. Just beautiful work man! Mikey likes it!
onevoicewild is offline  
Sponsored Links
Advertisement
 
post #4 of 119 (permalink) Old 05-28-2013, 12:36 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)
Quote:
Originally Posted by onevoicewild View Post

Sir your membership in the plumbers Union has been approved. Just beautiful work man! Mikey likes it!

Thanks cheers.gif

Soon tons of pictures
Juthos is offline  
post #5 of 119 (permalink) Old 05-28-2013, 01:14 AM
New to Overclock.net
 
Hukkel's Avatar
 
Join Date: May 2011
Location: Dutchland
Posts: 3,716
Rep: 107 (Unique: 76)
Great stuff! That is awesome. Your build really has cleaned up bu using the acrylic piping instead of the tubing.

I will need to ship a similar package soon. Please keep us updated on how the tubing withstood the travelling. I am mostly scared for that. That the loop will leak and it will become one big mess.



Hukkel is offline  
post #6 of 119 (permalink) Old 05-28-2013, 09:29 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)
Quote:
Originally Posted by Hukkel View Post

Great stuff! That is awesome. Your build really has cleaned up bu using the acrylic piping instead of the tubing.

I will need to ship a similar package soon. Please keep us updated on how the tubing withstood the travelling. I am mostly scared for that. That the loop will leak and it will become one big mess.

Thanks Hukkel
The guys from bitspower asked me to empty the system before the shipping because they were scared as well, i also removed some parts of the loops and placed in a different box. Later on i will post a picture to explain it better.
You will ship your rig from Dutchland to ?
Juthos is offline  
post #7 of 119 (permalink) Old 05-28-2013, 01:27 PM
Retired Staff
 
derickwm's Avatar
 
Join Date: Dec 2010
Location: Boston, MA
Posts: 12,389
Rep: 379 (Unique: 291)
derickwm is offline  
post #8 of 119 (permalink) Old 05-29-2013, 11:52 PM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)
Quote:
Originally Posted by derickwm View Post

Cool stuff, nicely done smile.gif

Thanks
Juthos is offline  
post #9 of 119 (permalink) Old 05-30-2013, 01:04 AM
New to Overclock.net
 
Hukkel's Avatar
 
Join Date: May 2011
Location: Dutchland
Posts: 3,716
Rep: 107 (Unique: 76)
Quote:
Originally Posted by Juthos View Post

Thanks Hukkel
The guys from bitspower asked me to empty the system before the shipping because they were scared as well, i also removed some parts of the loops and placed in a different box. Later on i will post a picture to explain it better.
You will ship your rig from Dutchland to ?

Yeah when it is finished it will be shipped from The Netherlands to the US and/or Japan depending on where the trade show will be.

I am going to build a case for traveling. Perhaps emptying the loop is a good idea. But @ Bitspower one would expect them to know how to fill a loop etc. But @ the company I am building for I have a hard time thinking that tongue.gif



Hukkel is offline  
post #10 of 119 (permalink) Old 05-30-2013, 04:27 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2012
Location: Cavaria con Premezzo, Italia
Posts: 301
Rep: 22 (Unique: 21)
Quote:
Originally Posted by Hukkel View Post

Yeah when it is finished it will be shipped from The Netherlands to the US and/or Japan depending on where the trade show will be.

I am going to build a case for traveling. Perhaps emptying the loop is a good idea. But @ Bitspower one would expect them to know how to fill a loop etc. But @ the company I am building for I have a hard time thinking that tongue.gif

It's a good excuse to force them to pay you a plane ticket biggrin.gif.
Juthos is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off