USB mouse hard overclocking (2000 Hz+) - Page 63 - Overclock.net - An Overclocking Community

Forum Jump: 

USB mouse hard overclocking (2000 Hz+)

Reply
 
Thread Tools
post #621 of 639 (permalink) Old 06-28-2019, 12:23 AM - Thread Starter
New to Overclock.net
 
SweetLow's Avatar
 
Join Date: Jan 2016
Posts: 445
Rep: 53 (Unique: 30)
Quote: Originally Posted by X7SHaDe View Post
These steps enabled me to retain the overclocked polling rate, but I think if I try to change it again, the overclock will be disabled because I only have the "nopatch" driver now.
If you carefully read description just about your post then you have to understand that all signed versions of hidusbf.sys are actually "nopatch" versions on modern windows 10.
SweetLow is offline  
Sponsored Links
Advertisement
 
post #622 of 639 (permalink) Old 06-29-2019, 03:23 PM
New to Overclock.net
 
Join Date: Mar 2017
Posts: 41
Rep: 0
Im moving from windows 7 to 10 soon because they are abandoning it and im also buying a ryzen 9.

The problem is I don't know how things are in windows 10 in order to oc my wmo to 500hz without test mode. Can it be done?

I cannot read 63 pages.

I have also found this guide, is it legit?

https://github.com/vadash/1000hz
WMOman is offline  
post #623 of 639 (permalink) Old 08-01-2019, 06:52 AM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 2
Rep: 0
atsiv method broken on latest windows build (18945 - 1907). Can downclock but no overclock. The attached file is a zip of usbport.sys and USBXHCI.sys. File sizes larger than 1903
Attached Files
File Type: zip Build 18945.zip (422.8 KB, 29 views)
X7SHaDe is offline  
Sponsored Links
Advertisement
 
post #624 of 639 (permalink) Old 08-02-2019, 01:07 AM - Thread Starter
New to Overclock.net
 
SweetLow's Avatar
 
Join Date: Jan 2016
Posts: 445
Rep: 53 (Unique: 30)
Quote: Originally Posted by X7SHaDe View Post
atsiv method broken on latest windows build (18945 - 1907)
Ok. I will check this now but if the MS code has changed, then I can probably fix it only after two weeks.
P.S. usbxhci.sys was changed

Last edited by SweetLow; 08-05-2019 at 02:37 AM.
SweetLow is offline  
post #625 of 639 (permalink) Old 08-21-2019, 02:57 PM
New to Overclock.net
 
Join Date: Mar 2018
Posts: 1
Rep: 0
How can i check if my mouse supports ocing? I have an issue with a4 custom driver which seems to block refresh rates highet than 145. And cheapest possible logi with stock win 10 driver oces surprisingly good so its not the fault of pc i think.
Ultimauser is offline  
post #626 of 639 (permalink) Old 08-23-2019, 12:04 AM - Thread Starter
New to Overclock.net
 
SweetLow's Avatar
 
Join Date: Jan 2016
Posts: 445
Rep: 53 (Unique: 30)
Quote: Originally Posted by X7SHaDe View Post
atsiv method broken on latest windows build (18945 - 1907). Can downclock but no overclock. The attached file is a zip of usbport.sys and USBXHCI.sys. File sizes larger than 1903
Ok, test version for this build.
Attached Files
File Type: zip hidusbfn.zip (29.9 KB, 51 views)
SweetLow is offline  
post #627 of 639 (permalink) Old 08-26-2019, 02:01 AM - Thread Starter
New to Overclock.net
 
SweetLow's Avatar
 
Join Date: Jan 2016
Posts: 445
Rep: 53 (Unique: 30)
Ok, little guide - how to completely unload atsiv (its driver) after using.

https://github.com/LordOfMice/Tools/...ster/atsiv.zip

In archive you will find the real atsiv's drivers (which are just incorporated in atsiv.exe - but can be extracted).
You have to (all with elevated rights)
0. Copy atsiv.sys to any folder, but the usual path for drivers is %windir%\system32\drivers (only once)
1. Create service for driver (only once):
sc create atsiv type= kernel start= demand binpath= system32\Drivers\atsiv.sys
(spaces are MATTER). The example is in Create_Service.cmd
2. then you can start and stop this service (and load atsiv.sys in & unload it from memory) by usual way in any time:
sc start atsiv
sc stop atsiv

So to load atsiv, then load hidusbfp and then unload atsiv:
sc start atsiv
atsiv.exe /f d:\path\hidusbfp.sys
sc stop atsiv

Hope this help.

pwd to internal archive is my exact nickname
SweetLow is offline  
post #628 of 639 (permalink) Old 08-30-2019, 01:55 PM
New to Overclock.net
 
Join Date: Aug 2019
Posts: 1
Rep: 0
Sorry for my english, I use google translator
For several days now I can’t accelerate the mouse to 500hz. After reading many posts on this forum, I could not find the answer.
I have Windows 7 7601 x64. Mouse: WMO 1.1. I'm trying to overclock the mouse on USB 2.0 and 3.0 but all to no avail. Above 125hz does not accelerate. Can only lower to 31hz and 62hz. Tell me pls the actual ways to solve overclocking to 500hz.

update: After a few hours of searching, I found advice to remove the USB HUB 3.0 driver. The mouse disconnected, usb ports stopped working. Within 5 minutes, all drivers (except 3.0) were installed and everything worked.

Last edited by lightwalkerr; 08-31-2019 at 05:15 AM. Reason: Found a simple answer
lightwalkerr is offline  
post #629 of 639 (permalink) Old 09-07-2019, 07:55 PM
lololol
 
qsxcv's Avatar
 
Join Date: Feb 2014
Posts: 4,227
Rep: 365 (Unique: 152)
yay 8khz working again.

info and my procedure (i'm not sure what's actually necessary, but this worked for me without much effort)
0. my laptop is on win 10, version 1903, os build 18917.1000
1. enable test signing
run command prompt as administrator, then run
Bcdedit.exe -set TESTSIGNING ON
reboot
2. download hidusb.zip from https://github.com/LordOfMice/hidusb...er/hidusbf.zip
download hidusbfn.zip from
Quote: Originally Posted by SweetLow View Post
Ok, test version for this build.
unzip both
3. run hidusb\Driver\Setup.exe
make sure "Filter on Device" is unchecked for now.
click "Install Service"
close it
4. in hidusbfn\DRIVER\AMD64, copy hidusbf.sys to C:\Windows\System32\drivers
replace existing file.
5. open Setup.exe again. check "Filter on Device", set the rate, and click restart
6. ???
7. profit

too busy to check forums as regularly
pm me if i forget to respond
qsxcv is offline  
post #630 of 639 (permalink) Old 09-16-2019, 12:39 AM
New to Overclock.net
 
Join Date: Feb 2018
Posts: 19
Rep: 0
does the overclock work on model o- ?
and final mouse air 58
thanks!
charlieputh is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off