Click Latencies compiled - Overclock.net - An Overclocking Community

Forum Jump: 

Click Latencies compiled

Reply
 
Thread Tools
post #1 of 377 (permalink) Old 08-06-2016, 09:09 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)


Direct link to the spreadsheet.

Negative latencies: I have used the SteelSeries Ikari as the baseline hence it is 0ms. Anything else at 0ms means it has the same click latency as Ikari. Anything in negative numbers means it is faster than the Ikari by that amount.
Currently the only way to benchmark is comparatively, since an absolute minimum is not known. (Please give it some thought.)


Some time ago I became very interested in click latency, so I started following and digging through numerous forum threads, mousing blogs and mouse review pages. I have been making a list for myself and have been very particular in keeping the list accurate and up to date. I went through with it in order to collect information for my own self, but I think it will be useful to others too. If anyone spots a possible correction, please post here so we can verify and maintain this list.

I will be updating this list whenever there is something to be updated.
Almost all of these results are at 1000Hz polling rate. I have also tried to mention the best firmware versions wherever I could.
badben25 is offline  
Sponsored Links
Advertisement
 
post #2 of 377 (permalink) Old 08-06-2016, 09:10 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)
The information to put this together is messy and unorganized, but here's where some of it is from: 1 | 2 | 3 | 4 | 5

I have used many sources, though I'd like to thank:
uaokkkkkkkk
rafalog
qsxcv
vanir1337

Last edited by badben25; 01-02-2019 at 02:16 AM.
badben25 is offline  
post #3 of 377 (permalink) Old 08-06-2016, 09:10 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)
Some links to KeyResponse PK for 'bump testing':
Latest release here (direct link)
Official webpage (scroll down the page)
Last version with old interface (without timer, easier to use)
badben25 is offline  
Sponsored Links
Advertisement
 
post #4 of 377 (permalink) Old 08-06-2016, 09:10 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)
Note to Mods: If this thread crosses any rules, please PM me before modifying/deleting anything. I will do the requested changes myself; it was a lot of work to do this. Thanks.

If required, maybe this thread should be a sticky so it can help more members.


I am looking for some verifications and hoping someone can help:

# Why is the Roccat Savu fw1.18 and 1.20 the best? Was it improved tracking? What is the click latency on these?

# I was corrected that all SteelSeries Kinzu v1 releases have good click latency. Need latency numbers from other releases apart from P/N:62010.

# The Logitech G402 and G303 have new firmware that has made them slower. Need to verify this and the firmware version number.

# The click latency of SteelSeries Rival 100 (yes, again) and firmware version number.

# Delay between left and right click on DM1 Pro S and Nixeus Revel?


I want to add click latency of:

SteelSeries Rival (on fw newer than 1.2.0.0)

SteelSeries Rival 300

SteelSeries Sensei / Sensei Raw

Logitech G502

Finalmouse Tournament Pro

Finalmouse Scream One

Roccat Kone Pure Optical (with fw number)

Roccat Kone Pure Military (on fw newer than 1.10)

Genius GX Scorpion M6-600, M6-400


Help me out, OCN members!
badben25 is offline  
post #5 of 377 (permalink) Old 08-06-2016, 09:38 AM
Mouse reviewer
 
Ino.'s Avatar
 
Join Date: Sep 2011
Posts: 3,092
Rep: 405 (Unique: 238)
I could only give values against the G303 at best, don't have any of the faster ones readily available.

Also look into adding a table instead of plain text.
Ino. is offline  
post #6 of 377 (permalink) Old 08-06-2016, 09:57 AM
New to Overclock.net
 
ramoramo's Avatar
 
Join Date: Jun 2016
Posts: 12
Rep: 0
Ty very much smile.gif Exactly what I needed.
ramoramo is offline  
post #7 of 377 (permalink) Old 08-06-2016, 10:02 AM
New to Overclock.net
 
wareya's Avatar
 
Join Date: Jun 2015
Posts: 1,699
Rep: 74 (Unique: 43)
> Roccat Kone Pure Military (on fw newer than 1.10)

My WMO at 1000hz is ~8ms slower than my KPM FW1.11. Give or take an ms.

It's probably exactly the same as fw1.10.

Also my abyssus v2 is ~approximately~ halfway between the WMO 1000hz and the KPM fw1.11.
wareya is offline  
post #8 of 377 (permalink) Old 08-06-2016, 11:04 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)
Quote:
Originally Posted by Ino. View Post

I could only give values against the G303 at best, don't have any of the faster ones readily available.

Also look into adding a table instead of plain text.

That would do as well. We could still adjust figures into the list. For now I'll take anything and everything in regards to the missing info.
badben25 is offline  
post #9 of 377 (permalink) Old 08-06-2016, 11:24 AM
New to Overclock.net
 
gene-z's Avatar
 
Join Date: Jul 2011
Location: USA
Posts: 926
Rep: 37 (Unique: 34)
Nice idea, but you're better off creating a Google Spreadsheet and sharing it publicly. Would be much better having the ability to sort highest to lowest and vice versa. It would also be much tidier.
gene-z is online now  
post #10 of 377 (permalink) Old 08-06-2016, 11:54 AM - Thread Starter
¯\_(ツ)_/¯
 
badben25's Avatar
 
Join Date: Nov 2013
Posts: 551
Rep: 43 (Unique: 35)
I'll get onto it as soon as I can. Are there any additional points or ideas for it? I will be making a table and possibly a chart/graph as well.
badben25 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off