Looks like someone heard our pleas for a straight sided simple ambi mouse..
PMW3327: 220 IPS 30G
117L * 63W * 36H mm
76g +- 1%
Doesn't sound too shabby
Got mine today
PMW3327 220IPS 30G
Default profile steps 400 800 1600 3200 @ 1000hz
LOD 1CD, no adjustment in software
Chinese 50M Omrons.
All buttons a tad lighter and crisper than SteelSeries 110, less travel.
Wheel click also lighter but less crisp.
Button latency 2ms faster than G Pro Wireless (wired mode).
Kailh 9 encoder.
(Perhaps too) subtle notches while turning.
Wheel ribs very tactile
Significantly less slant than G Pro, might still have been a bit less for my taste.
Significantly less forward taper than the G Pro
Perfect height and curve, doesn't touch my palm while clawed like the G Pro or Abko would.
Worst part: The feet are too thin. The mouse bottom is partly indented, with a sharp edge on the de-dent that snags on the mousemat.
Medium coarseness plastic texturing, better than G Pro / GPW fine texturing for my dry hands
Noticeably back heavy, but can be fixed by a 10 min mod that reduces back weight by 6 gram.
Second worst part, it's thin but very stiff. Might splash out on a paracord on this one.
General build quality
Seems top notch for a mouse at this budget (€25), comparable to the Steelseries Rival 110. No rattling.
Well built light budget ambi, needs some investment to make it really shine (feet, cord). Can be easily modded for better balance and weight (70 grams) in about 10 mins without visual signs but light bleed. If you do that it's probably the best MX300/G1/G3 alternative in some time: No cuts and edges of the G303, less slant and bulge than the G Pro, even a fair bit lighter.