Can't get rid of mouse acceleration [Help] - Overclock.net - An Overclocking Community
Forum Jump: 

Can't get rid of mouse acceleration [Help]

Reply
 
Thread Tools
post #1 of 23 (permalink) Old 11-04-2019, 11:31 AM - Thread Starter
New to Overclock.net
 
SpirosKGR's Avatar
 
Join Date: Mar 2013
Posts: 34
Rep: 0
Can't get rid of mouse acceleration [Help]

Hello guys, why i still have mouse acceleration? I am using mousemovement recorder from the markc to test.
@ 1000hz more red/green lines than
@ 500Hz

https://imgur.com/a/V1rZieS





I tried this test with 1000hz and 500hz but i got pretty much same pretty much results

___________________

What i tried so far.

• * Mouse Options * *

> I set my mouse speed to 6/11,
> turned off the EPP,
> Dactivated the acceleration in the mouse driver

~ Bios Options:

Cpu @ stock
[email protected] only

C states Auto

Intel Speedstep ✓ E N A B L E D
Intel TurboBoost ✓ E N A B L E D
Intel SpeedShift X D I S A B L E D

xhci hand off X D I S A B L E D

My motherboard has only usb 3 ( 3.1 ) usb ports so i dont have any usb 2.0 to test with it.

I am using this port for the mouse:

- EndgameGear XM1 ( Firmware 1.88 - latest )

________________________________


I tried this test with and without markc fix installed and ....... same results :/

I tested this with a Logitech G102, G305..... same results.

i tried this test with different dpi steps ( like 400 800 1000 etc ) and...... got same results.

I tried this test with different surfaces ( Cooler master Shift.RX medium, Steelseries Qck, Razer Goliathus )... same

I tried different kinds of movements, i didn't hit the screen's edge margin or something, i was moving the cursor only in the middle of the screen.
[img] https://i.imgur.com/lbFSbEQ.png [/img]
_________________

-- - What i am using,

Windows 10 LTSB - fresh installed up-to-date
Windows 10 1903 - fresh installed up-to-date



Power Plan: High Performance
Display settings: 1920X1080p, 100%
Refresh rate: 75Hz

-- - Hardware Specs,

i7-8700K stock
ASRock Phantom Gaming ITX/AC
16GB Crucial Ballistix SportLT 3200/16
Sapphire RX580 pulse
Corsair SF600
Samsung 840pro 128, 850evo 500GB
Corsair H110 AIO #arcticP12


What can i do now?
Motherboard issue?
Software/bios wrong setup?
Mouse problem?

Last edited by SpirosKGR; 11-05-2019 at 10:35 AM.
SpirosKGR is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 11-04-2019, 11:34 AM
The last VRM burner
 
Join Date: Mar 2018
Posts: 2,320
Rep: 46 (Unique: 27)
Uninstall any extra software for your mouse, including firmware from device manager.

PC for all
(21 items)
CPU
i7 5775c @4.2GHz/3.8GHz
Motherboard
Gigabyte Z97X Gaming 5
GPU
Iris Pro 6200
RAM
F3-2400C11D-16GAB Samsung Rev. Q
Hard Drive
Corsair MP510
Hard Drive
Samsung Evo 860
Power Supply
Seasonic Focus Plus 750W
Cooling
Artcic Liquid Freezer II 360mm
Cooling
Arctic P12 PWM x2
Cooling
Arctic P14 x4
Case
LianLi 330X
Operating System
Windows 10 64-bit Pro
Monitor
Samsung C24FG73FQUX
Monitor
Benq GL2250 80Hz
Keyboard
Corsair Strafe Red Silent + 1.6x6mm o-rings
Mouse
SteelSeries Rival 600
Mousepad
Artisan FX Raiden
Audio
Audio in Motion SC808 + MUSES8820 + 2x 2xLME49990
Audio
AKG M220
Other
NZXT Hue+
Other
Mayflash F300 Arcade Stick
▲ hide details ▲
BroadPwns is offline  
post #3 of 23 (permalink) Old 11-04-2019, 11:43 AM - Thread Starter
New to Overclock.net
 
SpirosKGR's Avatar
 
Join Date: Mar 2013
Posts: 34
Rep: 0
Quote: Originally Posted by BroadPwns View Post
Uninstall any extra software for your mouse, including firmware from device manager.
Unfortunately i tried that, also i tried the following:
a) Format, fresh win installation
b) markc acceleration fix
c) no extra mouse drivers
d) > mousemovementrecorder ... same results
SpirosKGR is offline  
Sponsored Links
Advertisement
 
post #4 of 23 (permalink) Old 11-04-2019, 11:46 AM
Graphics Junkie
 
UltraMega's Avatar
 
Join Date: Feb 2017
Location: USA
Posts: 2,191
Rep: 56 (Unique: 51)
Install Logitech setpoint. From setpoint you should be able to turn off mouse acceleration. Setpoint is the software for all Logitech mice.

4K Rig
(7 items)
CPU
Intel 7700k @4.2ghz
GPU
Zotec 1080 Ti
RAM
16GB 3200mhz DDR4
Hard Drive
250GB nvme + 500GB SSD + 4TB HDD
Monitor
Samsung 4K 65 inch TV
Monitor
Pixio PX276 27inch 144Hz 1ms 1440p
Audio
Sound Blaster z
▲ hide details ▲
UltraMega is offline  
post #5 of 23 (permalink) Old 11-04-2019, 11:53 AM - Thread Starter
New to Overclock.net
 
SpirosKGR's Avatar
 
Join Date: Mar 2013
Posts: 34
Rep: 0
I tried that to. Now i m using the endgame xm1 @UltraMega
SpirosKGR is offline  
post #6 of 23 (permalink) Old 11-04-2019, 12:21 PM
Graphics Junkie
 
UltraMega's Avatar
 
Join Date: Feb 2017
Location: USA
Posts: 2,191
Rep: 56 (Unique: 51)
Did you disable "enhance pointer precision" in windows?


4K Rig
(7 items)
CPU
Intel 7700k @4.2ghz
GPU
Zotec 1080 Ti
RAM
16GB 3200mhz DDR4
Hard Drive
250GB nvme + 500GB SSD + 4TB HDD
Monitor
Samsung 4K 65 inch TV
Monitor
Pixio PX276 27inch 144Hz 1ms 1440p
Audio
Sound Blaster z
▲ hide details ▲
UltraMega is offline  
post #7 of 23 (permalink) Old 11-04-2019, 12:38 PM - Thread Starter
New to Overclock.net
 
SpirosKGR's Avatar
 
Join Date: Mar 2013
Posts: 34
Rep: 0
Quote: Originally Posted by UltraMega View Post
Did you disable "enhance pointer precision" in windows?


The first thing i did ( every time )
SpirosKGR is offline  
post #8 of 23 (permalink) Old 11-05-2019, 06:28 AM
New to Overclock.net
 
Straszy's Avatar
 
Join Date: Apr 2016
Posts: 134
Rep: 9 (Unique: 7)
Delete pls
Straszy is offline  
post #9 of 23 (permalink) Old 11-05-2019, 06:58 AM
New to Overclock.net
 
numberfive's Avatar
 
Join Date: Aug 2016
Posts: 611
Rep: 21 (Unique: 11)
it is the same when you move your mouse strictly within the edges of the mousetester (not the screen)?
what is up with the polling? its 80 then 1k then 80 again. do you try to move it as slow as possible?
numberfive is offline  
post #10 of 23 (permalink) Old 11-05-2019, 10:36 AM - Thread Starter
New to Overclock.net
 
SpirosKGR's Avatar
 
Join Date: Mar 2013
Posts: 34
Rep: 0
Quote: Originally Posted by numberfive View Post
it is the same when you move your mouse strictly within the edges of the mousetester (not the screen)?
what is up with the polling? its 80 then 1k then 80 again. do you try to move it as slow as possible?
I tried all of that
Attached Thumbnails
Click image for larger version

Name:	Untitled.png
Views:	35
Size:	680.6 KB
ID:	304596  


Last edited by SpirosKGR; 11-05-2019 at 10:56 AM.
SpirosKGR is offline  
Reply

Tags
endgame , markc , mouse acceleration , mouse movement recorder , xm1

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off