The pcb I made worked well and was a success, all the software bugs are ironed out at this stage. I found that the side buttons were difficult to align, either they wouldn't click or were bottomed out. The shell had issues due to the conversion.
The scroll wheel would rub in the upper shell, so i filed around it. middle click was very stiff. the first pcb i did had the sensor soldered low in the pcb, this caused the pcb to rise up. i avoided the issue in the second pcb by pushing the sensor pins up from underneath before soldering.
I was happy with it, but give it to a reviewer and he'd send it back. I never sold any of them, though I did gift an earlier one with the jkicklighter pcb away to dellor because i couldn't bear to rip it apart again. I used to watch his twitch streams occasionally. He broke it in a short time and i assume trashed it. It's against forum policy to sell items without paying a vendor fee.
In short, don't bother unless you want to spend a lot of time tinkering with it. the wmo mod would be a lot easier though, lacking side buttons. I've ordered a hongsund mamba clone (€6!) which is supposed to be the bees knees for larger hands like mine. I may make a pcb to fit it, if it don't die from coronavirus (I have asthma)
Last edited by gipetto; 03-26-2020 at 02:58 PM.